Audi a4 pin please

[makura]

Hi guys
I have a audi A4 1995 model and i would like to program a new key to the car,i am using a SBB programmer and it wont accept a 5 digit pin code,is there a way of converting it to a 4 digit pin code or do i have to change the tool altogether?is my pin correct? i am getting 37639.How do i program anew key if i use VCDS lite?

[faze]

Hi guys
I have a audi A4 1995 model and i would like to program a new key to the car,i am using a SBB programmer and it wont accept a 5 digit pin code,is there a way of converting it to a 4 digit pin code or do i have to change the tool altogether?is my pin correct? i am getting 37639.How do i program anew key if i use VCDS lite?


For PIN CODE use Immoreader 5 (you find it here http://www.digital-kaos.co.uk/forums...lli-ecu-69900/ (http://www.digital-kaos.co.uk/forums/f175/golf-iv-1-6-marelli-ecu-69900/)) or use any hex redactor

For key programming look here Immobilizer - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Immobilizer)

[makura]

Cool,thanks bro.on the key data is there a way one can edit key data directly in to the damp file using hex editor,lets say i have read a key using AD90 and it reads 40 f8 6c a8 80 00 b5 33 which bites are used for the dump?

[makura]

For PIN CODE use Immoreader 5 (you find it here http://www.digital-kaos.co.uk/forums...lli-ecu-69900/ (http://www.digital-kaos.co.uk/forums/f175/golf-iv-1-6-marelli-ecu-69900/)) or use any hex redactor

For key programming look here Immobilizer - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Immobilizer)
Hi
I have looked at the attached document and i dont get how it comes to a log in pin 0887 according to my nimerimal 03 77 gives me 877 and if you swap bites it gives me 30467.any way if i change the hex file to give me a 4 digit pin will it work?something like 07 07 to give me a pin code 1799.

[faze]

Hi
I have looked at the attached document and i dont get how it comes to a log in pin 0887 according to my nimerimal 03 77 gives me 877 and if you swap bites it gives me 30467.any way if i change the hex file to give me a 4 digit pin will it work?something like 07 07 to give me a pin code 1799.


Vag group use four(or seven) digits for login.For example:you find hex 03 77-> 887dec->for vag login 0887.VAG-COM or VCDS use five digits for login->you can enter 00887
P.S.
Sorry for bad english

[makura]

Ok i get now,for all log in codes you need to add 0's at the beginning to match the pin that's wanted if its a 5 pin you add two zero's if the calculation had three digits and one zero if a four digit log in is needed.
Cool mate,thanks a million.PS your English is not so bad,i am not English either

[ngakson2002]

Ok i get now,for all log in codes you need to add 0's at the beginning to match the pin that's wanted if its a 5 pin you add two zero's if the calculation had three digits and one zero if a four digit log in is needed.
Cool mate,thanks a million.PS your English is not so bad,i am not English either

Dear Mate,
Here is the key logic from your dump

Megamos fixed

ID13 - JMA TP03
Data: FF81 34A0 ECDE 7742 FF81 34A0 ECDE 7742

Input this manually in your AD90 and program in a T5 transponder ready to start your car.

Good luck

[bram380]

Pin code: 1939

[makura]

Thanks to all who helped,special thank you to ngakson2002,programmed the t5 transponder and it was all systems go.
Car started thread closed....................