03 Honda Accord 4D, 77960-SDA-C014-M1

[lwood]

i need some help with this one guys.
customer bring me a module that someone already play with.
what i need from you guys is a clear dump for honda accord 77960-SDA-C014-M1, i will calibrate seat myself.

[alex1g35]

Here is one. Hope this helps.

[martij976]

I got crash one at this moment if that helps...
U can clear it. It's ordinary dump.

[lwood]

I got crash one at this moment if that helps...
U can clear it. It's ordinary dump.

i will use crash dump and clear it.

[morfej]

Another one to compare.

[lwood]

Another one to compare.



Morfej is the tested file a clear file?

[morfej]

I take another look at that "test" I've put together with crash. Don't thing it is ok.

I would do something like that (attached), but not tested either.

[ledojo]

I have a crash--any chance to get a tested solution?

Thank you for looking.

[ledojo]

Anyone have any clear ones for this? I'm going to try to clean using morfej's example, but not sure if either is a good one. I asked customer to bring car in so I'll post any results.

[arpi]

here Ledojo,your file cleared,no pass

[ledojo]

I should mention I sent car back with my attempted clear maybe 15 minutes before your reply arpi. They found out customer needed a curtain airbag so after they fix, I will try your clear. Thank you.

[martij976]

Looks like file posted above may not work...
Here is another one to try..
Post results pls..

[ledojo]

@arpi (http://www.digital-kaos.co.uk/forums/members/192315-martij976/) I got car back (mine didn't work... nothing new there). I tried yours and light went off. Thank you.

@martij976 (http://www.digital-kaos.co.uk/forums/members/192315-martij976/)I looked at yours--as always something interesting to learn from your files. Thank you.

On my attempted clear, I cleared the 5F0 line (along with other parts) and didnt clear the block starting at 650.... So, I still have a lot to learn and appreciate all your help.

Thank you both.

I wish I'd checked here before sending car off just to test, but car's gone and light went off--all ended well.


(http://www.digital-kaos.co.uk/forums/members/192315-martij976/)

[arpi]

glad I could help

[narkeleptk]

Thanks, Ledojo & Arpi.

I was able to use your files for comparing to help me clear a 77960-sda-c024-m1.