BDM Positioning Frame "Made in house"

[xandaschurras]

Hello Boys, I you present my BDM Positioning Frame " Home made " hope that you like.

The adapter for the bosch I throw this one with Spear/Radius Spring Loaded Pogo Pin on the 0.0535"th P160-B-4R.


http://i.ebayimg.com/17/!BoQIQFgBmk~$(KGrHqYOKiIEu,nT!n-TBLmzKL1g8w~~_35.JPG


Regards

[lolooo1981]

Mine "made in house", 2 in fact inox and aluminium have 2 hand for up plate.Your's simply but effective !

Best regards

[wiseman]

Hello Boys, I you present my BDM Positioning Frame " Made in House " hope that you like.

The adapter for the bosch I throw this one with Spear/Radius Spring Loaded Pogo Pin on the 0.0535"th P160-B-4R.

Regards

Nice:top:
I know how much these jigs are to buy,

[rappttor]

i have one stand similar to yours for desk work, but i found my self in dificulty when i have to go on the "field" so i made my self a smaller one, which is not so fancy but beleve me it does the work, and it is verry small and handy.
http://img714.imageshack.us/img714/4476/69532764.jpg (http://imageshack.us/photo/my-images/714/69532764.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

http://img687.imageshack.us/img687/8813/60993016.jpg (http://imageshack.us/photo/my-images/687/60993016.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

http://img707.imageshack.us/img707/1142/54654029.jpg (http://imageshack.us/photo/my-images/707/54654029.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

http://img198.imageshack.us/img198/5554/92179969.jpg (http://imageshack.us/photo/my-images/198/92179969.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

as you see :laugh: easy to make also...

br

[wiseman]

Loving the home brew gear

[xandaschurras]

i have one stand similar to yours for desk work, but i found my self in dificulty when i have to go on the "field" so i made my self a smaller one, which is not so fancy but beleve me it does the work, and it is verry small and handy.

as you see :laugh: easy to make also...

br

This one very well, it is simple but effective.

Very good idea.

A greeting

[pablo1971]

awesome frames.....will post a picture of the one i made....

[Stanton]

I use 2 bricks and some 2"x4" timber.
Works a treat.

[pablo1971]

let me no what you think,it is untested......

[donesko]

nice,
does anyone now where to get spring probes for siemens/mareli for clone, for bosch I have that from ebay and they work great

[Novik_UA]

I made Siemens probes from pogo-pins from the same ebay seller then bosh pogo-pins.

[bazare]

Here is my invention ... cost is less than 10 euro. I'm waiting for the spring probes.

[oep]

bazare is the best :-)

ITS ON!!! lol

[grinovsky]

:roflmao::roflmao::roflmao::roflmao:

[lolooo1981]

I think best is original positionning frame because of material is in full aluminium material but too expensive...

Best regards

[elchip]

Hello Boys, I you present my BDM Positioning Frame " Made in House " hope that you like.

The adapter for the bosch I throw this one with Spear/Radius Spring Loaded Pogo Pin on the 0.0535"th P160-B-4R.

Regards

Look nice. Can you make footprint of all probes with pinout name on footprint's ?

I need precise for all SIEMENS . MARELLI , DELPHI , BOSCH.

Or if someone can pls.

Regard's

[levisdj]

Made in house would be : Home made?

[r6eck]

Not sure if its allowed on here but here goes
For sale BDM frames at special price of ?220 including uk postage

[z786]

do DK members get a discount :D

[r6eck]

do DK members get a discount :D

Thought that was quite a special price,will take an extra tenner off so ?210 delivered in uk,postage extra anywhere else
:beer:

[donesko]

Look nice. Can you make footprint of all probes with pinout name on footprint's ?

I need precise for all SIEMENS . MARELLI , DELPHI , BOSCH.

Or if someone can pls.

Regard's

what is spacing between probes for siemens and marelli?

[bazare]

This is from the forum ... posted by another user

[donesko]

This is from the forum ... posted by another user

ok thanks, so spacing is about 1,20mm for marelli.
I asked dude frome ebay if he can make probes like that.

"
Hi, the smaller spacing one will not have wire wrap type. This is may be with holder with 30 awg wire. I don't any information about this. I can make spacing 1mm, 1.27mm single in line adapter. But it won't fit the mounting jig. If you want it, please advise the spacing and how many pins you want. Thank you.
"

so I guess pairing two like this would work:
1.27mm 7 position Spring Loaded Pogo Pin Adapter Jtag | eBay (http://cgi.ebay.com/1-27mm-7-position-Spring-Loaded-Pogo-Pin-Adapter-Jtag-/250831745363?pt=PCC_Modems&hash=item3a66bcb153)

[bazare]

Just buy the spring pogo pins (the small one) and do your own adapters.

[elchip]

Just buy the spring pogo pins (the small one) and do your own adapters.

Nice ..
No need sponsor I finded spring needles solution gold plated and finishing adapter's.

30 pcs profesional needles cost me 10E.

Regard's

[elchip]

This is from the forum ... posted by another user
Yes that I was make for my need's and free share on DK.
My personal work in Sprint Layout 5. I use Altium but most peoples not and I was rework in that little but good program to peoples can do it at home.

Regard's

[elchip]

what is spacing between probes for siemens and marelli?
1.27 mm

Regard's

[BigTee]

Home made is always best

[vwphun]

Nice ..
No need sponsor I finded spring needles solution gold plated and finishing adapter's.

30 pcs profesional needles cost me 10E.

Regard's

Can you post link for this pogo pins?

[bazare]

just search on e-bay ...

[vwphun]

Yes, I know, but I would like find some distributor in Europe.

[z786]

any1 have footprint or schematics to a proper bdm frame?

[Subzulu]

Wow :-)

These look great.. nice work

[donesko]

can we use original siemens adapter with bdm clone?

[bazare]

your question is incomplete. Original Siemens probe of which tool? different tools have different pin-outs. EVC for example has different pinout comparing to CMD

[donesko]

your question is incomplete. Original Siemens probe of which tool? different tools have different pin-outs. EVC for example has different pinout comparing to CMD

I think its a clone of evc bdm100. I managed to read edc16 no problems.

looks like this on picutre
http://web.tradekorea.com/upload_file2/sell/22/S00022522/BDM100__BDM100_v1255_BDM100_chip_turning.JPG

[bazare]

no it's a clone of CMD-BDM

[dj_piex]

:guns: My method is much more 'fast :eviltongue:

Uhauahuahuahah!

[tanasio]

:guns: My method is much more 'fast :eviltongue:

Uhauahuahuahah!

too simply and too fast!

[yarecky3]

dj_piex -> Woooooooooooow :)
nice job. buahaha

[chli1976]

This is my BDM frame

[xandaschurras]

Already there are many models of bdm frame, which wants to do one already it knows where to look.

A greeting and graces for teaching your models, is grateful

[daniel guerra]

This is from the forum ... posted by another user

Hi Bazare,
This Marelli probe seems to have 2 SMD's, does anyone know which one is? Or it's something else or nothing.

Thanks!

[powertdi]

This my project of BDM frame from Tile Cutter :)
Cost about 10 eur. In foto you see how to look cutter and after my mods a bdm frame. other things like probe holder (alu profile) and else I have found around in the garage .
So final cost is about 10 Eur.

[pablo1971]

powertdi-nice one,it looks like a bit of quality and puts mine to shame....:eviltongue::eviltongue::eviltongue:...lo l

[bazare]

The frame is still just a frame. I have also genuine frame now but time saving is just a minute or two. My home made BDM doesn't look as nice but functionability is pretty close. In the end all it matters for the frame is to WORK.
:P

[donesko]

Look like some italians made clone spring probes for simens,delphi etc.. prices are 90euros+
juste google: schedini a molla per dima

[sepistar]

nice self mades here.
what is spacing between probes for bosch ecu?
best regards

[igornorro]

My desing in wood:

[pablo1971]

very neat......to neat for a home made...are you sure u made it...lol

[igornorro]

Yes, I made it. Exactly, I made 3 more; 4 in total.

At first, I not had the bosch probe. When it arrived, I had to change the piece that he held it.

Some pictures of the first and finally desing:

[z786]

u shud be a carpenter, not a chiptuner

[igornorro]

My father is a carpenter jeje.

[bondiblu]

Nice work Igornorro, this gives food for thought. I'm hoping to get my hands on an old large bench microscope from work to start my stand project, only thing is the base is very heavy.

[physyc]

any1 have footprint or schematics to a proper bdm frame?

That would be verry nice...

[xanubysx]

I have a few sets on more slots ... if someone wants to write ...

BDM kit for adpters BDM Programmer with spring pin - NO CHINA

- Bosch
- Siemens
- Marelli
- Delphi Motorola

[xanubysx]

[/URL][url]http://www.ebay.com/itm/180921248278?ssPageName=STRK:MESOX:IT&_trksid=p3984.m1559.l2649 (http://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l2736&_nkw=%09+BDM100+set+adapter+with+flexible+pins)


No china !!

[amaflo]

BDM kit adpters BDM Programmer OK
Best quality BDM frame with 10 bdm adapters, (http://www.carsung.net/EN/ProShow.asp?ProID=1056)