Clio III 2010 help needed please

[dave11674]

hi guys

got a 2010 clio here to do

did a 2009 last week and went ok in my dashfixer
this one i think may be different.

teh clocks are showing 21446miles
he needs them back to 8146miles

he said they just jumped up too ! lol

can any1 help
i cant get a good reading :S

dave

[dave11674]

ok guys stuck chip back on teh board and put clocks back in teh car
everythign gone to french and center display in middle of the dash is saying LOCKED now

any ideas ?

thanks

dave

[dave11674]

hi guys

i sorted this out
i believe the orig dump was slightly corrupted in some way.
its up for any1 to have a look at
when i put the chip back on the board and in the car it went to french and showed 65438km
strange.
so i programmed a dump i had from a 2009 clio
went on fine and showed the orig miles in there

all good
so just adjusted the dump once more and programmed the chip off the board as it was making one of the motors squeel if i clipped it with osc shorted.

all good now thanks.

tho it does say LOCK in the center dash display.
but renault can sort this under warranty

i think the code for the stereo is store in the clocks dump too as when i programmed the dump from the 2009 car it said CODE 0000 on the center display.

dave

[drpeter]

hi guys

i sorted this out
i believe the orig dump was slightly corrupted in some way.
its up for any1 to have a look at
when i put the chip back on the board and in the car it went to french and showed 65438km
strange.
so i programmed a dump i had from a 2009 clio
went on fine and showed the orig miles in there

all good
so just adjusted the dump once more and programmed the chip off the board as it was making one of the motors squeel if i clipped it with osc shorted.

all good now thanks.

tho it does say LOCK in the center dash display.
but renault can sort this under warranty

i think the code for the stereo is store in the clocks dump too as when i programmed the dump from the 2009 car it said CODE 0000 on the center display.

dave


I looked at your dump compared it with another one because I got a wrong reading with my script, the dumps looks almost the same so I thought it might be another version, but it was corrupted.
Thanks.

[mastaflex]

radio code is not on the dash
you have just to obtain code and put it back.

why are you clipping the eprom,? you have access to the eprom for clip so why not dessolder it and have a good reading. or at least do two or three readings to see if dimp is same

[dave11674]

i did the 2009 one last week with same chip and clocks
this was done via shorting the osc and clipping the chip
all went 100%
so thought id do it the same way.

all is sorted now guys thanks for your input ;)

Dave

[dave11674]

do you fella's have any dumps for the new clio III knocking about please ?

dave