PDA

View Full Version : hot start Octavia 81Kw 1999



Irgl
9th June, 2011, 05:01 PM
Hi,could some one help with hot start on my octavia Thanks a lot

diga1
10th June, 2011, 11:01 PM
you can simply build in reley on ect senzor and 4.7 kohm resistor, or remap

z786
11th June, 2011, 12:22 AM
you can simply build in reley on ect senzor and 4.7 kohm resistor, or remap

can you elaborate please :D

diga1
11th June, 2011, 09:30 PM
you take reley and cut one of the vires 1 or 3 the one that isnt earth and then you take a relay and built it in betwen that cut vire trought vich signal goes to ecu. then you put resistor 4.7 kohm and connect it on earth. and reley must be in position off, and other vire from ect connect to the pin vhen it will be on, and then connect signal vire vich goes to ecu, then you need a trriger + vich you connect on altenator on that + vich is signal for instrument cluster. and other on earth, so vhen you give ignition on car will think that temp. of engine is 0 C and it will turn on heaters and give more diesel and vhen car will start the signal from altenator will swich relay and it will show actual teperature to ecu.

markovojvodic
11th June, 2011, 09:45 PM
did you try coding engine ecu as automatic except 00001 to 00002 ?

diga1
12th June, 2011, 11:52 AM
if you recode it to automatic it doesnt go well betwen 1200-2500 rpm how shuld i say it is twitching(i cant find the right word in english) and there shuld be fault in ecu( no signal from tcu) bestn solution is relay

synkrotronic
12th June, 2011, 12:16 PM
Hi,could some one help with hot start on my octavia Thanks a lot

Hi
If they are not errors on injection system,you also could have a starter engine problem (low rotation) ,need to repair and confirm battery,cables connection,if are 100%.

Regards

markovojvodic
12th June, 2011, 12:17 PM
hmmm make chip tuning and finished , relay isnt original and look messy

ruscic
12th June, 2011, 10:15 PM
repair starter.

waldi1979
12th June, 2011, 10:26 PM
Here You go.

mazilus007
13th July, 2011, 09:09 AM
please pass, thank

julo45
15th July, 2011, 07:56 PM
Send me please pass. Thanks

leaserhu
17th July, 2011, 10:51 PM
Try this file
and use thanks button :-)