Skoda Stream 9s12 code needed frm dump pls

[dave11674]

hi guys

here is my dump from the above unit
read in using my upa

9S12DG256B MCU

thanks for any help

can any1 who points in the right direction as to the code if its easy to read out of the dump ? as im going to do a little tut on doing this radio with the upa and alternate easier wire up points.

thanks

dave

[smoggy]

try....1745

[decauto]

}}}}1745{{{{

[dave11674]

Thanks guys. R these codes only avail from a dump tool or is it easily worked out by looking in the dump. Will report back later

Dave

[milzal]

dump is crypted with any XOR maybe

[goliat100]

little more than only xor , needs sharp eyes and clear mind with little beer :beer:

[dave11674]

to the 2 that posted the code for me 100% worked a treat tho i think the unit is fluffed as no volume lol

so took the deck back to him n complained

he gave me 3 more units for free
so can any1 help me with decoding them

thanks

dave

[smoggy]

to the 2 that posted the code for me 100% worked a treat tho i think the unit is fluffed as no volume lol

so took the deck back to him n complained

he gave me 3 more units for free
so can any1 help me with decoding them

thanks

dave

34627 code 0421
39749 code 1013
41412 code 1451

[lupu_sandu]

stream1_9s12_34627.bin - 0421
stream1_9s12_39749.bin - 1013
stream1_9s12_41412.bin - 1451

[dave11674]

you guys are legends
i will post back results
been looking thru the intial first dump i posted to try find teh 1745 code
but cannot find anythign

any clues as to how to work it out guys ?

or what software your using to decode the dumps and where to purchase this soft ?

thanks again

dave

[smoggy]

NYO4 gives code
the code is encrypted within the dump

[dave11674]

oh i have that heheh
but it never starts up right mind lol
does ny04 work on win7 x64 ?

dave

[smoggy]

oh i have that heheh
but it never starts up right mind lol
does ny04 work on win7 x64 ?

dave

yes it does

[dave11674]

guys

i tried the codes for these decks

now they are the same as teh first one he gave me lol
no volume from either of them ?
any ideas ?
my orig one has sound and works fine but none of the new ones he gave me have sound

any ideas ?

are they coded to the car in such a way other than the PIN number ?
CHASSIS number also may b ?

if so i could change it in the dump and re write it back to the car yes ?

thanks

dave

[smoggy]

if the original radio is the same you could try putting the dump from it to one of the soundless ones and see what happens.