PDA

View Full Version : 2009 Passat CC


highrisk
15th June, 2011, 12:33 PM
Does any one know what type of chip is on this board?
T72
15th June, 2011, 12:41 PM
NEC+24c32

regards
highrisk
15th June, 2011, 12:44 PM
Can it be done with TU
T72
15th June, 2011, 12:45 PM
Can it be done with TU
what do you think?
exe123
15th June, 2011, 12:46 PM
Can it be done with TU

best joke ever!
highrisk
15th June, 2011, 12:50 PM
Sorry just asking I was not sure
milesbetteroff
15th June, 2011, 02:31 PM
Well I suppose it was worth a try
highrisk
15th June, 2011, 02:51 PM
I have a black box programer from prospeedo.upa..r250..and tu..will any of those work? As u can tell I never did a nec24c32 any help would be thankful
mastaflex
15th June, 2011, 03:16 PM
highrisk you are running a highrisk trying this with TU.

and as i know TU stops on 2008
haroutioun
15th June, 2011, 03:18 PM
hello dear , i hop dont do anything for this kind dash Nec 24c32 . because you need spacial tool to read (Nec 24c32) so i allwase use avdi abrites without problam .carfully you must desolder the eeprom 24c32 and read by saved after avdi ask to you load the dump after by obd2 done avery think you must to do..so i dont know if your tools can do this work...
highrisk
15th June, 2011, 03:23 PM
Lol..thanks just wanted to see if I could do it..time to get anouther tool..will digi 3 do it? Thanks in advance
Ding-Dong
15th June, 2011, 03:46 PM
u mean to say DIGIMASTER 3 ???
highrisk
15th June, 2011, 03:52 PM
Yes..sorry about that
cokolo
15th June, 2011, 08:53 PM
hello dear , i hop dont do anything for this kind dash Nec 24c32 . because you need spacial tool to read (Nec 24c32) so i allwase use avdi abrites without problam .carfully you must desolder the eeprom 24c32 and read by saved after avdi ask to you load the dump after by obd2 done avery think you must to do..so i dont know if your tools can do this work...

In version 12.0 VAG (Avdi Abritus)do not have to desolder eeprom (24c32 / 24c64) just entering service mode on OBD and write new km :top:
batandball
15th June, 2011, 10:48 PM
VDP Smellecom Via OBD no problem. Thats the tool to get for VW/AUDI/SEAT/SKODA. Just a thought ?????????
BATANDBALL
autofan1965
16th June, 2011, 07:43 AM
In version 12.0 VAG (Avdi Abritus)do not have to desolder eeprom (24c32 / 24c64) just entering service mode on OBD and write new km :top:

Because they cant put 24c64 in service mode with eeprom preparation...