View Full Version : starview 2 the box help
sucha
18th December, 2008, 10:35 PM
hi there still having trouble loading up 4.55 firmware error message: model name does not correct, can someone help please.
trevor
18th December, 2008, 10:41 PM
where does it say this what are you doing ?
sucha
18th December, 2008, 10:45 PM
hi, just trying to load new firmware onto the box 4.55, but it keeps saying error message: model name does not correct, tried loader 4.00 and 4.03, thanks
trevor
18th December, 2008, 10:47 PM
is it the box?
what firmware ?
what loader?
what cable ?
is it on standby ?
sucha
18th December, 2008, 10:52 PM
hi there
the box
4.55
loader 4.00, 4.03
rs 232c
its on stand by
trevor
18th December, 2008, 10:58 PM
hi make sure your com port is set to the same one as the gt loader do u know how to do this ?
unadkat
18th December, 2008, 11:20 PM
hi there
the box
4.55
loader 4.00, 4.03
rs 232c
its on stand by
mate
do it switched on and not on standby
download the 4.54.e_e and the logo file which will be in the zipped file
and then flash the box with the 4.54e_E and after that flash the logo file
When you flash the Logo file.. make sure on the Gtrom you select the option
background data file
once you have done that, you then apply the fix.
After that switch it off
Switch it on
re scan channels
switch on emu
Set default key
exit 3 times
and wait for the code to update
:champions:
sucha
19th December, 2008, 10:10 PM
hi mate, try that today had no luck, when i load 4.54e the box goes blank
rampantic
19th December, 2008, 10:55 PM
hi mate, try that today had no luck, when i load 4.54e the box goes blank
You may have to load the old 4.51 back on to get the box active again mate...
I had no problems loading the 4.55 after that...
arshadis
19th December, 2008, 11:27 PM
gfdgdf dfd fg d gdf gd
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.