EZS 215 545 00 08 with 2x HC05X32

[ggpanos]

Hi,

I need some help. I got a MB EZS 215 545 00 08 with 2x HC05X32 mask 1D69J to program IR-Keys.

I have a ZIF QFP64 socket for Carprog, so I tried to read one CPU with Carprog to avoid soldering - desoldering CPU many times. But, carprog did not tried to bypass security and erased my CPU.

I have attached photos and the 2 dumps form both CPUs read with DSP3+.

1. When security is not bypassed, does the CPU erase eeprom only , or both eeprom + flash ?
2. Which CPU is CPU1 and which is CPU2 ?
3. Can anyone send me a pair of dumps for my EZS?

Thanks in advance

[Room]

1. When security is not bypassed, does the CPU erase eeprom only , or both eeprom + flash ?
2. Which CPU is CPU1 and which is CPU2 ?
3. Can anyone send me a pair of dumps for my EZS?


Hi mate!

1. eeprom only
2. 196205/ZC507480 is CPU1
196206/ZC507481 is CPU2
3. Here your dumps corrected

[ggpanos]

Hi mate!

1. eeprom only
2. 196205/ZC507480 is CPU1
196206/ZC507481 is CPU2
3. Here your dumps corrected

Thanks for your response.

Did you send me a test file or you have tried this before ? When I load the 2 files you send me to my NEC-programmer tool does not find any already programmed keys. If I use dump form other EZS it finds programmed keys (and I know that EZS I try to program had 3 IR-Keys programmed). Thus I believe something is wrong with these files.

[Room]

What wrong with you original keys mate ?
Just write dumps and you keys must work.
If you have not keys make new one and they will work.