PDA

View Full Version : peugeot 406 IAW 48P2.300 virgin dump


ezenigbo
20th June, 2011, 07:53 PM
please i need virgin dump or immo off dump for this peugeot 406 ecu no. IAW 48P2.300 attached is dump from 29f400
rossoelab
20th June, 2011, 10:42 PM
immo off....
ezenigbo
21st June, 2011, 12:09 AM
any pin to cut?
Zmann
21st June, 2011, 04:29 AM
Hi ezenigbo, as I tried on other 48P2xx immo off dump no need to cut any pin.

Btw, what the engine is your 406 car? with air con.? I would like to try rossoelab's dump too coz the one I have with air con. not operational.
sogaro
21st June, 2011, 05:46 AM
This is good, kindly leave feedback if it works or not
ezenigbo
21st June, 2011, 06:09 AM
ok i will report
ezenigbo
22nd June, 2011, 12:24 AM
the car did not start
magnacin
19th August, 2011, 07:48 PM
enclosed is 100% tested immo off for 406 MM 48PXX.
I just tested and worked like a charm.
Please report your result
Zmann
20th August, 2011, 01:21 AM
enclosed is 100% tested immo off for 406 MM 48PXX.
I just tested and worked like a charm.
Please report your result
My guess is your car is no AC otherwise, it's dead by this dump?
magnacin
20th August, 2011, 04:29 PM
Car has AC, electric, sun roof, etc.
I tested it with 3 different bsi and started with all of them. If your car doesnt start maybe problem is on other area. Hope you can sort it out.
Cheers.
Zmann
20th August, 2011, 04:53 PM
My poor narration. I tested the dump of chksum A920 which should be identical to yours some time ago, the car start but AC not operational, put the ori dump back on the same ECU, AC working.
magnacin
20th August, 2011, 05:35 PM
ok, got it.
I am sorry I don't know what may be. Have you tried to modify parameters using peugeot planet?
Zmann
20th August, 2011, 06:06 PM
That's the good point I am just roughly recalled, if I'm right in PPS there is a selection 'AC controlled by engine ECU or...', it was set as by ECU. But don't think that if reselect by none-ECU will work because the hard wiring should differ, need to test
SR71
4th April, 2020, 08:27 AM
enclosed is 100% tested immo off for 406 MM 48PXX.
I just tested and worked like a charm.
Please report your result

Hello,

Could someone reupload this file for me please, i download it but it's damaged.

Thanks
tothzsolt
4th April, 2020, 08:39 AM
ezenigbo (https://www.digital-kaos.co.uk/forums/member.php/65223-ezenigbo)

virgin flash okay help push thnx button,no pass rar file
SR71
4th April, 2020, 09:24 AM
ezenigbo (https://www.digital-kaos.co.uk/forums/member.php/65223-ezenigbo)

virgin flash okay help push thnx button,no pass rar file

I look for an immo off file because of lost key.

A tested file please because i can't anymore desoldering the Flash 29F400BC after resoldering that on the ecu.

Thanks