PDA

View Full Version : tacho universal & audi TT mk2 8j



m3m5
21st June, 2011, 06:29 PM
hi mates! i want reprogram dash, I acces by audi autodetect can, find cluster, read kms, writte new value, said OK, but don't do nothing, kms don't change.

can change by obd? or need open dash? i havent' got manual forthis car.

thanks!

haroutioun
21st June, 2011, 06:43 PM
Hi dear.
how you read the dash to get the massage saying writte new value, said OK, by obd2?. if by abd2 saying to you ok .after you must trying disconnect battery negative cable for 10 secent ,after reconnect the negative cable ,after it must show you the new value. try...

audiotek
21st June, 2011, 06:46 PM
Model TT before model 2000
Diagnostic programming
Use the OBD II -plug:
The diagnostic port near your left knee when you sit on the driver?s seat.
? Turn ignition on.
? Connect the Tacho Universal to the OBD II plug and the diagnostic port.
? Select the menu AUDI-Audi TT-TT Diagnosis.
? Enter the new value..
? Verify the new value with OK.
? For some models you have to enter the old value on demand.
Note:
If you cannot change the value, the cluster is model 2000.

m3m5
21st June, 2011, 06:58 PM
thanks!! model 2000? car is 2007!!

I have disconnect battery for try!! now I will post results!

diga1
21st June, 2011, 07:05 PM
mate audi 2007 and taho universal? you must be kidding do not bring tu near that car you may kill something vith it

m3m5
21st June, 2011, 07:18 PM
not, not work!!

you have got manual? it's possibly by obd? or by eprom?

haroutioun
21st June, 2011, 07:32 PM
Hi, dear i dont use befor this taho universal ,so i dont know about this programmer , (above i read massage of dk friend diga1) i thing he know about this programmer tacho universal,so my friend thad is risk to do by your programmer, maybe is dificelt for you again by dump, so maybe any friend can help you about your dash..

exe123
21st June, 2011, 08:02 PM
Audi TT 8J Micronas 3217. Forget TU for it. It will never work!

m3m5
21st June, 2011, 08:51 PM
thanks to all.
Could do it with xprog? or avdi?

milesbetteroff
21st June, 2011, 08:57 PM
Hi mate both of they programers you mention in last post will do the job don't mess about with tu on that car you are wasting your time

m3m5
21st June, 2011, 09:24 PM
scuse me m8 i don't understand your words. I'ts impossible do it?

sherl645
22nd June, 2011, 12:01 AM
Impossible with Tacho Universal.

m3m5
22nd June, 2011, 09:36 AM
I need do it, what programmer or tool could buy?

maumaumau
23rd June, 2011, 07:46 AM
AVDI... X PROG-M...CARPROG...