MB A class 2006 need help...

[kaToo]

Hi all
I need help for MB a class 2006
I read the MC9S12dg128 from EZS and i need to generate a key
without need to virgin esl end ecu
Please if anyone could calculate key for me i will appruciate

I read the dump with rosfar
In atach is Dump MC9s12DG128

THANKS

[kaToo]

here is bin format

[lagas]

hello,

In my garage I have too mercedes A class 169 2006. Problem is no ignition and remote control not work (central locking not work).

I have 2 keys no one can't swicth ignition, when i put key in ignition nothing happening.

I found what ESL (Electronic Seering Lock) is mechanicaly fault (inside ESL small motor fault).

Order new from mercedes, its came, and I take out small faulty motor and place to old ESL. Put back in car and the same story. No ignition.

My experience with mercedes EZS not very big, read on DK, and thinking can ECU locked after ESL go fault? because steering with fixsed ESL not locking or unlocking.

any proposals welcome

EZS part nr.: 169 545 19 08

[lagas]

My story to be continued...

Play few hour's with Star. Do check put first or second key in ignition. Terminal 15C not ON and Star say EZS faulty.

Ok, order from dealer new EZS, and Orange key. And do with Star ezs replaysment procedure, transfer coding...

Then put Orange key in ignition switch, wait then LED on Orange key turn OFF, then put key in ignition and try to switch to position 1 or 2 to leave for key learning.

nothing key not turn, no one. And Star show what EZS not activated.

ESL inside (NEC x051)
EZS inside (MC9S12 mask 1L59W)
Key's inside (NEC x081)



Please any help :/ on the way ... what i need to turn on ignition still have not used ESL PCB.

[lagas]

this is what star show old EZS.

[lagas]

with new EZS...

[lagas]

and one more.. new ezs

any comments welcome

[bursuc]

did you make adaptation in EZS ? and coding? you have a MENU to activate EZS

[lagas]

did you make adaptation in EZS ? and coding? you have a MENU to activate EZS


yes i do adaptation and coding

[cardoctor]

Cheks CAN betwin EIS and EVL

[lagas]

you have a MENU to activate EZS
about activation you can activate with valid key only.

[lagas]

Cheks CAN betwin EIS and EVL


all CAN communication is cheked, and all works.

[lagas]

I think both key is dead. Now working on it, and try from 2 key do one working. Thanks all. I update you.

[lagas]

update for today..

repaired both keys, and learned, car start and run :)

thanks for all !!

[gtmech]

update for today..

repaired both keys, and learned, car start and run :)

thanks for all !!

what did you find wrong with the keys?

[lagas]

what did you find wrong with the keys?

in one of keys coil was faulty, i repair coil, and other key change AMS A642MRL

[gtmech]

in one of keys coil was faulty, i repair coil, and other key change AMS A642MRL

yeh thats a common prob with the coil