PDA

View Full Version : 250_222 29F400 on a 206 missclicked with gallettto



Patilhas
23rd June, 2011, 07:22 PM
Hi guys , I had a problem with a 206 2.0 hdi EDC15C2
HW and SW 250_222 when i tuned the car i missclicked with galleto and put on ecu the wrong file 594_648 :afraid: !
And now he car wont start !
How i solve this problem!
Have to dessolder the 29F400 and program it ???
Anyone helps me please ...
Now when i try to read,it says error !!!
Thanks all !

ecutuners
23rd June, 2011, 07:25 PM
Dont ID ecu just go to write and you may have some chance, if not boot mode or remove am29fxxx
Good Luck

Patilhas
23rd June, 2011, 07:38 PM
So, you said if i write again the ori file the ecu accepts
or you saying to me to try ??
Thanks ...

Patilhas
23rd June, 2011, 07:51 PM
What is the pinout to put it to boot mode ! Thanks

miha99
23rd June, 2011, 07:55 PM
So car wont start, write again ori file, nothing to lose.Also depend of wrong file if you can load again over OBD, if ecu is locked, than hot air and willem is your best friend.

Patilhas
23rd June, 2011, 08:00 PM
When i Try to write .ori a message appears (error) Turn of ignition, wait 10sec and try again ...and still doesnt work
Any suggestion ???
Thanks ...

miha99
23rd June, 2011, 08:23 PM
I see you don`t like hot air, than try with MPPS and slow speed over OBD.

alexs307
23rd June, 2011, 10:18 PM
MPPS does EDC15 recovery, as said above.

delio78
23rd June, 2011, 10:57 PM
only desoldering 29f400 and programing with original file

delio78
23rd June, 2011, 11:02 PM
your chip 29f400bt or 29f400bb ?

Patilhas
25th June, 2011, 12:38 PM
Thanks all people,for the help ! Problem solved :)

grinovsky
25th June, 2011, 12:51 PM
how did you solved it?

bazare
25th June, 2011, 12:52 PM
let the others know how you solved the problem ... so next time when some has a similar problem can solve after reading this topic. Anyway i think the fast solution is your case is desolder job + programer ...in 20 min ECU is alive again.