View Full Version : Ford Fiesta immo off
Vagilektro1
25th June, 2011, 06:48 PM
Ford fiesta immo locked please help? NUMBER ECU S118107002 F:afraid:
cleevesy
26th June, 2011, 10:21 AM
dont think it is possible, program new key in
Vagilektro1
26th June, 2011, 06:03 PM
is locked ecu
Vagilektro1
26th June, 2011, 06:05 PM
Program for Unlock ECU
Vagilektro1
26th June, 2011, 07:40 PM
immo locked.
Vagilektro1
26th June, 2011, 07:42 PM
immo locked
keygargoil
26th June, 2011, 08:01 PM
i think you need to start from the begining here
firstly what year is it , is it a seperate pats box or integrated into the ecu or dash because the older ones can be a bit tempremental by reading the tms 370c702 chip you can either create a new key or write one in or if its in the dash read the 9s12 post the dump and il give you the key data, there is a seperate ecu on around 2002 at the side of the engine on some with either a 95040 or 95080
keygargoil
26th June, 2011, 08:03 PM
i didnt spot your file do you want the key data
Vagilektro1
26th June, 2011, 08:21 PM
2004 engine. FXJB SIEMENS ECU
keygargoil
26th June, 2011, 11:41 PM
what have you tried to programme keys with it should go in uinder pats 3 can outcode incodeor under mazda 2 this is the same system i have used in the past when it wont communicate under ford pats 3 can,
page 1 password 03
page 2 id 00
page 3 serial no 02e4f201
page 4 il give you the key data when my calc starts working for page 4 ok
huzzen27
27th June, 2011, 05:26 AM
dont think it is possible, program new key in
Immo off solution for all M8,just programme three files one in dash 9s12 and 2 files in ecu 93c56 and 44 pin amd ic and just pull out the socket of immo near steering lock thats all
kokkinos panos
27th June, 2011, 06:00 AM
Immo off solution for all M8,just programme three files one in dash 9s12 and 2 files in ecu 93c56 and 44 pin amd ic and just pull out the socket of immo near steering lock thats all
thank you for your immoff solution m8.
ecu have 93c86 not 93c56
are you sure for 93c56?>thanks
Vagilektro1
27th June, 2011, 07:53 PM
this program is locked
Vagilektro1
27th June, 2011, 08:05 PM
petrol egine 2004 siemens ECMS 118107002 F
kokkinos panos
27th June, 2011, 08:13 PM
petrol egine 2004 siemens ECMS 118107002 F
hello,
what do you mean<program locked>?what is the use of the files that you uploaded?
thanks
Vagilektro1
27th June, 2011, 08:41 PM
yes.Greek thou,I am from Volos.
Vagilektro1
28th June, 2011, 07:11 AM
not start engine
huzzen27
29th June, 2011, 04:36 AM
thank you for your immoff solution m8.
ecu have 93c86 not 93c56
are you sure for 93c56?>thanks
I have tried by myself and tested solution but it will not work on car with abs,by the way its for deisel engine, regards-Huzefa
Vagilektro1
29th June, 2011, 04:12 PM
It does not work any program.
Vagilektro1
29th June, 2011, 08:44 PM
I did got in front with his own things. And the developers with diagnostic Ford
2560172885
17th June, 2020, 11:27 PM
Hi what sofware to 4d see pages page2 page3 p?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.