PDA

View Full Version : Chip-tuning Opel Omega Y26SE Motronic 3.1.1


fargulkim
27th June, 2011, 04:47 PM
Guys, anybody help me to chip my opel omega Y26SE Motronic ME3.1.1? Please, help me!

More thanks for help!
P2XA
27th June, 2011, 08:35 PM
Galleto does not support this ecu but you must use other device to read/write it.
P2XA
27th June, 2011, 08:36 PM
May be MagPro help you...
fargulkim
27th June, 2011, 10:02 PM
I read this ecu via galletto!
fargulkim
30th June, 2011, 09:21 AM
guys, help me!
filecloud
30th June, 2011, 12:51 PM
guys, help me!
Have you tried to write the stock file back with your galetto clone? Only because it can be read as a me1.5.5 it does not mean it accepts a write the same way.
Try this first and report. If your car still starts you can proceed.
If it does not start the last thing you need is a tuningfile...
greetings,
filecloud
estate
6th July, 2011, 10:14 AM
forget software mods on this engine, fit 4x A cams for 15+bhp increase and huge torque increase............ simple bolt on mods are the way forward, the cams are available for pennies....
fargulkim
6th July, 2011, 10:27 AM
fit 4x A cams? what is it?
Kic
8th July, 2011, 01:02 PM
Not A cams but G cams! (Stock x30xe inlet cams)
Install them on both intake and exhaust of your y25se
and you should see a 15bhp increase...
fargulkim
22nd November, 2011, 10:29 PM
anybody can calculae checksumm on this ecu and make chip-tuning?
filecloud
22nd November, 2011, 10:38 PM
anybody can calculae checksumm on this ecu and make chip-tuning?
Hello
Please find a good tool that supports this ecu first. Your read is not complete. The ecu has a 1MB file content!
greetings,
filecloud
fargulkim
27th November, 2011, 10:38 AM
which device i must using for reading/writing this auto?