PDA

View Full Version : Mercedes B-klass DPF problem



chikiloksik
1st July, 2011, 08:51 AM
Hi friends. I have the problem with remove the DPF from this car - B-klass , 2006 m.y. , 2.0 CDI , EDC 16c32.
I read flash with MPPS and edit with ECU Safe 2.0.0 (and ECU Safe 1.9.3).
Nothing happened. car has no power and from the exhaust pipe is black smoke.
My files in attachment.
Help please.

chikiloksik
16th July, 2011, 09:16 AM
surely no one can help me?

Bazil_mb
16th July, 2011, 10:27 AM
Hi,
fix fault code or post

chikiloksik
16th July, 2011, 01:59 PM
Hi,
fix fault code or post

no fault codes

mercis
16th July, 2011, 03:14 PM
:shot:yes,with ecusafe have you never errorcode

trigital
16th July, 2011, 05:51 PM
no fault codes

No smoke if there are no DTC.

alexs307
18th July, 2011, 08:15 AM
Try these 2 files.
Start with 2nd one, if it doesn't work try with 1st one.

chikiloksik
21st July, 2011, 08:16 PM
Try these 2 files.
Start with 2nd one, if it doesn't work try with 1st one.

Hello. Now check your files to a car - the result is bad. A lot of black smoke, low boost pressure (1250 mbar), low power.

alexs307
22nd July, 2011, 07:33 AM
Sorry, tried what I already knew and applied on other cars.

mariooo
22nd July, 2011, 08:12 AM
Hi friends. I have the problem with remove the DPF from this car - B-klass , 2006 m.y. , 2.0 CDI , EDC 16c32.
I read flash with MPPS and edit with ECU Safe 2.0.0 (and ECU Safe 1.9.3).
Nothing happened. car has no power and from the exhaust pipe is black smoke.
My files in attachment.
Help please.
hello test with this file as an attachment .. But do not just write complete tables

Bazil_mb
22nd July, 2011, 11:42 AM
Try to clean EGR.

chikiloksik
27th July, 2011, 08:13 AM
Try to clean EGR.
EGR is ok. With original firmware no problems with power and smoke