2001 scenic sirius 32n 1.6 16v

[obdmaster]

Just done a 2001 scenic 32n immo off, with a known good file.

Cut pin 58 , but now ecu complains of no connection to aircon, i take it the air con request is on pin 58 also from multifunction control unit (UCH)on data line.

Am i correct in cutting pin 58 on a 2001 scenic sirius 32n???

All answers will be thanked.:top:

[tas_daz]

test this dump this is for no climatronic only for a/c normal.it is 1600 16 v.i tested and work but i dont know the lamda if work ok.test and told me

[obdmaster]

thanks but you really didnt answer my question m8

[tas_daz]

yes you cut 58 pin.before i have problem with scenic and it is in file when i change all work ok.you don t have power on compreser of a/c and on relay.right?make with emulator to be sure 100%

[racin-snake]

obd mat you should use a good known file with ac and should be fine with pin 58
ask Adam hes got a good file worked for me for same car scenic 2001 1.6 16v with aircon
ime not at home but if yer still stuck tomorow ile send it to ya :top:`

[tas_daz]

give me the number of ecu and the siemens code and i have some dumps

[lupu_sandu]

M8, all sirius32 (except CAN) have immo line on pin 58.
A/C lines are on 10,18,46,82 and 83 (pressure switch-18,82,83, compressor relay - 10 and A/C request - 46).
Double check if you cut correct line, an check 5 wires.

[obdmaster]

Lupu definately cut correct pin.

Racin snake, i used one of your files you sent me a bit ago m8, thanks.

Anyway customer is testing car today and hopefully aircon didnt work before.

Thanks for replies

Obd