peugeot 307 me7.4.4 immo off

[ezenigbo]

please help me ,i have done immo off on this 307 ecu bu did not see the f3 and f4 to cut from the central sucket

[abuuauto]

hi, the ecu it have 3 plug check centre one plug look 3and 4 it have A,B.C.D.E.F and more so in line 3 you cut on pin F and line 4 cut on pin F check it .thanks

[ezenigbo]

thank for your reply,i know all this,i have even done one before and it worked, but this one i could not see any wire in the center socket f3 and f4 ,the ecu no. is ME7.4.4 0 261 207 329 96 409 004 80i d01 bosch

[racin-snake]

some dont have the f3 and f4 wires on the loom side
if its not there just plug it in it should be fine mate
been there it worked fine

[ezenigbo]

i plug it in and the car start and refused to accelerate,i did the immo off with otochek step1 and step 2

[racin-snake]

i used a file that i got from a forum member
so couldn't say about the file
but if you post the file used maybe someone here can see what went wrong ?

but i had no problems with this ecu both flash and prom dumps were modified and off it went