PDA

View Full Version : passat tdi 105



Autotecno2006
5th July, 2011, 11:35 PM
hi all, need help/advice, have 2005 passat tdi 105HP, came in running badly, worn cam & broken buckets. all repleaced with new parts,now no dtc`s. Problem is NO POWER & slow to accelrate, also takes extra cranks to start when hot, I have attached ecu file with with MPPS, would appricate if someone could give a look & advise, Regards P.

florinyes
6th July, 2011, 12:00 AM
Also had a similar one with worn buckets..customer wingging now after head gasket skim and new buckets no power at over 60 mph or up hill.

Is there anything in the map that causes this?? Very difficult to prove cars been pulling away OK before repaires as car was running quite bad..

levisdj
6th July, 2011, 10:23 PM
The air flow meter usually causes power loss.

filecloud
6th July, 2011, 10:43 PM
hi all, need help/advice, have 2005 passat tdi 105HP, came in running badly, worn cam & broken buckets. all repleaced with new parts,now no dtc`s. Problem is NO POWER & slow to accelrate, also takes extra cranks to start when hot, I have attached ecu file with with MPPS, would appricate if someone could give a look & advise, Regards P.

Hello
File is 100% original. So no problem from this side.
greetings,
filecloud

Autotecno2006
7th July, 2011, 12:42 AM
Hi all, Thanks Filecloud for looking at file, i have another Passat coming tomorrow so will be able to play with both. report tomorrow, P.

rego88
14th July, 2011, 05:16 PM
i don't have the permission for download the map, but you change the maf sensor and the car have a good response... for the problem an hot start, i know the maps to modified!! ;)

dannyuk89
14th July, 2011, 05:27 PM
pro nowt to do with ecu more like air flow meter or summet

rego88
14th July, 2011, 05:44 PM
hi all, need help/advice, have 2005 passat tdi 105HP, came in running badly, worn cam & broken buckets. all repleaced with new parts,now no dtc`s. Problem is NO POWER & slow to accelrate, also takes extra cranks to start when hot, I have attached ecu file with with MPPS, would appricate if someone could give a look & advise, Regards P.

this file for you, modified for good hot start

illestibor
6th October, 2011, 08:52 PM
Hello I have a seme hot strat problem with a passat 2006 1,9 tdi BKC engine 0281 012 742
Someone could help me?
thanks...

tiptroni
6th October, 2011, 09:07 PM
I think that I can help you.Please,send me SW(four digits in the second window after identification).
Regards!

illestibor
6th October, 2011, 10:17 PM
Carsoftware can modify some content but this is an 2 mb content.carsoftware can do 1 mb....How can i use that function?
Any idea..?
is edc16U31
The sw 1037377575

monitel_service
7th October, 2011, 09:14 AM
ILLESTIBOR your file with hot start problem

del635
7th October, 2011, 01:27 PM
Log with vcds and post logs, full throttle high gear most of rev range.

espen22
8th October, 2011, 11:22 AM
Yes, ... Log block 3, 8, and 11 with vagcom and post up...