View Full Version : L200 immo location
tellfaia
6th July, 2011, 08:16 PM
Hi to all i have now a 2001 L200 115hp and i need to replace the ecu (water damage) does anyone know what do i have to swap in the ecu in order to match the immo?
its a mr577084
e6t01476 h2 1608
i cant seem to find any of the usual suspects (24c** 95c**etc)
Any help appreciated
JIMMYQ
6th July, 2011, 08:19 PM
there should be an immobiliser box down in the drivers footwell you will need immo/ecu and matching key
ps. i did one a few days ago :)
sherl645
6th July, 2011, 08:46 PM
Yes there's nothing nice and easy to change in these. You were better to change everything.
Ronan
SaieedEissa
7th July, 2011, 12:28 AM
,did u try to program any key first ???? maybe it will work , it happend to me once , if not , send me immo file for virginise...
darwins
30th August, 2011, 01:57 PM
Hi tellfaia / Group
How did this one go ?
I have a L200 2001 which needs the engine ECU replacing.
Tried Id on all parts but hitting a brick wall.
Can a used ECU be reprogrammed with a dealer tool?
Or is it matched when the keys are programmed to the immobiliser box?
Any info / help would be great
Darwins
tellfaia
31st August, 2011, 07:55 AM
only piasini can do this, but i ended swapping processor (yes the bigger one:) ) and sort it out:)
nicamarcos
5th September, 2011, 02:01 PM
Hi to all i have now a 2001 L200 115hp and i need to replace the ecu (water damage) does anyone know what do i have to swap in the ecu in order to match the immo?
its a mr577084
e6t01476 h2 1608
i cant seem to find any of the usual suspects (24c** 95c**etc)
Any help appreciated
Everything into MCU Flash :)
richard27
5th September, 2011, 03:09 PM
http://a1109.hizliresim.com/11/9/5/11530.bmp
L200 ***304;MMO LOCAT***304;ON
tellfaia
6th September, 2011, 03:55 PM
Everything into MCU Flash :)
yes i?ve changed mcu and it ended up alright:) not a easy task but possible:)
tellfaia
6th September, 2011, 03:57 PM
http://a1109.hizliresim.com/11/9/5/11530.bmp
L200 ***304;MMO LOCAT***304;ON
yes i know i have zedbull too, but it was a ecu swap, i?ve tryed to adapt new keys but no luck:(
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.