caterpillar 40 pin wash file

[mmrj]

For those that are interseted I have a 40 pin wash file to share. Works with win flash and has been used many times in on highway ecms.

https://rapidshare.com/files/2073246782/1934649___40_PIN_CLEANER.zip


If this helps please push thanks... I could use them :top:



I myself could use some un-postable cat soft if anyone would care to share. Thanks

[smoreno]

what does this flash file do?

[servando]

hello my friend to serve this file

[smoreno]

servando thanks. I just did not understand you

[mmrj]

Flasfile cleans ecm . Can be used to get around high interlock codes when flashing pre low-nox in 40pin ecm. That's not its intended purpose but it works. Caution: always copy configuration first, under ecm replacement.

[Strykerforce]

have you tried this one already? I have a test ECM right now. I will try to erase if this is the purpose of this file.
Thanks for sharing buddy.

[Strykerforce]

This is for Perkins Application m8.
1934649 40 PIN CLEANER.....
Can this be compatible with CAT ADEM II ECM's or Just for Perkins?

[mmrj]

Yes its compatible. It's been used many times. Just be carefull as with any wash file. :top:

[mmrj]

Here's the way It's been used to get rid of high interlock. Flash your pre low nox before you program personality, flash wash then re flash pre low nox should remove high interlock.

Please push thanks if this helps ... I could use them.

[mmrj]

Also be careful with early 5ek ecms from 5ek10000 to 5ek 50000 you could end up buying a new ecm. I avoid them all together. I will post cat caution for not doing them.

[4hillbilly]

Also be careful with early 5ek ecms from 5ek10000 to 5ek 50000 you could end up buying a new ecm. I avoid them all together. I will post cat caution for not doing them.


yes have a new ecm handy or the old flash file thats on the ecm or a bloody big hammer