who is into volvo ?

[bijlaard]

Hi everybody
We my husband and me are doing about 5 volvo's a week
(today at one day 3 ) :-)
We are looking for volvo "specialists" to share some info with.
meaning read write flash, changing language packages, the how to do navigation,telephone,radio etc
when interested
please pm or here in thread :-)

maybe we kan share some deep info stuff

greetings from Holland

Ina

ps our china dice clone gave up today :-( had to borrow a original one at a volvo specialist......
hoping for garantee from china......

[markony79]

which year is car
if it after 2008, only online is posible

regards from sweden

[martij976]

I would like know those cars... because my wife is in there...
How can i adjust her age?? LOL just freakinkg out...

[gijsvm]

I would like know those cars... because my wife is in there...
How can i adjust her age?? LOL just freakinkg out...

Try to virginize !!! :fisheye:

[bgcomp80]

I make 5 volvo`s a day, here is a dash programmed in Romanian.

***x202a;Volvo XC70 2004 cu meniu in limba romana***x202c;‏ - YouTube

I clone ECM`s, CEM`s and other volvo computers .

For dash i use UPA and XPROG, next week i will receive Smok dash for Volvo. I hope is better than UPA, i hate calibrating the dash needles .

[martij976]

With Carprog U don't need remove cluster at all... And if U doing five of them a day, then u can save some time for another ten...:shot:

[T72]

I make 5 volvo`s a day, here is a dash programmed in Romanian.

***x202a;Volvo XC70 2004 cu meniu in limba romana***x202c;‏ - YouTube (http://www.youtube.com/watch?v=tvWgV8060FQ&feature=mfu_in_order&list=UL)

I clone ECM`s, CEM`s and other volvo computers .

For dash i use UPA and XPROG, next week i will receive Smok dash for Volvo. I hope is better than UPA, i hate calibrating the dash needles .
5 per day onlly? And still taking out needles for dash on video? strange!

[bgcomp80]

That`s why I bought Smok dash, it`s easier by OBD .

I make 5 volvo cars a day not volvo dashes, i repair other components on volvo cars not only program dashes .

[bijlaard]

which year is car
if it after 2008, only online is posible

regards from sweden

Hi
The language in dash is possible , read translate (or copy paste from dash with right language) and write back into MCU.
Only problem is radio,climatecontrol etc. its not changing with dash, so have to find a way to do that.
Have to look witch mcu is in there read it and find language package. (or something like that)

Or: buy a month full volvo software , find out how they at volvo do it, I know the language package what u get from volvo is very small (kb's)

regards

[bgcomp80]

You can switch radio, CCM, BCM and other components, all you need is to copy/clone the eeprom. The eeprom store the ID off every component .

[bijlaard]

I did change the 93C56 on a ecu (s60 2002) that worked, it's the one thats the farest away from connector (part that goes into the car).
next time i will try to clone it.

Next week i get a V70 from 2009 witch i can keep for experiments (few weeks) I will try to find the mcu where the language is stored in the radio/climate control.

Did someone try to clone the rearmirror ? I did read the flash did not write it into another rearmirror yet,

At my husbands work they had to replace for sometime one, they cost a lot of $ !!

regards

[bijlaard]

Next week i get a V70 from 2009 witch i can keep for experiments (few weeks) I will try to find the mcu where the language is stored in the radio/climate control.

regards

We took out the middle console and opend it There are 2 MCU's inside one located on the big print behind the button area, and one on a little print witch is located behind the display the MCU's are:
SAC7116VPV50-L38Y-QFR0821
MAC7111VPV50-L47W-QXM0809
When i can find a programmer who can read these mcu's I let u know if language is inside,
Then we have to search for the path from OBD to this mcu......

When somebody knows witch programmer we have to buy , please let me know :-)


Greetings from the Netherlands
Ina

[bgcomp80]

MAC7111 programmer.
P&E Microcomputer Systems - Cyclone MAX - Hardware Debug Interface and Stand-Alone Programmer for <b>ColdFire V2/V3/V4</b>, <b>Power MPC5xx/8xx, Qorivva MPC55xx/56xx</b>, and <b>ARM</b>. - ColdFire V2/V3/V4, Power MPC5xx/8xx, Mac7xxx, Qorivva MPC55xx (http://www.pemicro.com/products/product_viewDetails.cfm?product_id=145&CFID=6658007&CFTOKEN=2f3e173228086379-6DB5DD66-D4EA-E2B4-97DD8AFD819F8CA2)

I don`t think that the language is in ICM. The language is allways in DIM and can be in CEM for new models .

[bijlaard]

Where did u find the info that the language package diplayed at the ICM is in the chip of the CEM ?
Would interesting to know ,We have to open the CEM to to see which MCU is in there.
Or does somebody know which MCU is inside de CEM .
They language which is in the DIM does not cover the ICM ( volume,climate control texts ) We looked at the flash of the DIM very carefully , not there.

I see cyclone-max can handle a lot of chips :-)

greetings Ina