Subaru 2008 Mechanical Key code

[shitad]

Hello,
Can anyone help me with a JDM 2008 Subaru Impreza Mechanical Key code with chassis code GH8-004780.

Regards

[shitad]

Did this job today in 20 minutes.

T series Code was easily be found on the Driver door lock by simple loosening the screew ( same as on the newer Toyota's ) and pulling the lock about 1/2 out of the door and you find the code on the TOP of the housing.

Cut by code using my Subaru depth space keys and program with T300, done in 20 minutes.

[gokey]

for programming new key , need login code ?

[shitad]

for programming new key , need login code ?


No, no login code neded.
T300 did not ask for one, this was a all keys lost job. SBB clone should also do this job because Subaru really have not change their key secuirty program since 2000
all the way up to 2009 when they went to Can and smart Keys.

[gokey]

I have a similar work
IMPREZA 2007 all lost keys
fail to stop the alarm to program new key
what transponder did you use? id62 ?

[shitad]

I have a similar work
leganza 2007 all lost keys
fail to stop the alarm to program new key
what transponder did you use? id62 ?


Yes ID 62

BUT I always thought leganza is a Daewoo

Daewoo Leganza - Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/Daewoo_Leganza)

[gokey]

UH
my mistake
car is IMPREZA 2007 !!

[shitad]

I did a Google search today on how to program the remote and most people were saying to CUT the wire to the Alarm Horn to avoid the noise and continue as usual with the Remote programming so I would try the same to program the key.
When key programming is done you re-join the wire to the Alarm Horn.

Do a seach with google on "how to program 2007 Subaru Impreza Remote" and you might find some help

Regards

[Hanukkah]

Hi shitad... Will T300 work on a 2011 Subaru Forester also? Thanks...

[shitad]

Hi shitad... Will T300 work on a 2011 Subaru Forester also? Thanks...


I dout this since AD had to write new software for 2011 up Subaru.
The truth is I have not done a 2011 so I am not 100% sure but I do have my douts that T300 can do it. There is no arm trying however because most Subaru up to 2010 is on a tpye 1 system if it is not a button start

Regards

[Hanukkah]

I dout this since AD had to write new software for 2011 up Subaru.
The truth is I have not done a 2011 so I am not 100% sure but I do have my douts that T300 can do it. There is no arm trying however because most Subaru up to 2010 is on a tpye 1 system if it is not a button start

Regards

Did try doing this via immo dump... but was not successful. Maybe something different in 2011 models...

[autofan1965]

Facelift models are with 4d62 80bit chips.