PDA

View Full Version : 2003 Citroen Berlingo SID801A 5WS40155C-T



darwins
17th July, 2011, 08:08 PM
Dear Friends

Does any one have a solution for IMO OFF for this SID801A 5WS40155C-T ECU ?

Tried all programs I have including a file from OTO Check, The OTO file is listed as a different SID801A part number but It does start the engine but will not rev out.

The Vonix file will not start the engine but maybe this would allow programming now with Lexia, This van has various faults including a BSI issue hence IMO OFF is being attempted as wanted solution.

The fact it has been running with the OTO file i believe there must be another solution :)

An IM would be great if you want to keep a lid on a known solution.

Many Thanks

Darwins.

obdmaster
17th July, 2011, 08:57 PM
Try this my m8, post results. pass in pm.

darko123
17th July, 2011, 09:15 PM
send eeprom +flesch dump

obdmaster
17th July, 2011, 09:17 PM
My solution is only 93c56,:celticscarf:

darwins
17th July, 2011, 09:28 PM
Thank you obdmaster.
I will get the ECU back here and report when I get the feedback next week.

darko123, thank you for offer, I think a result can be achieved in 93c56 based on getting it running with another file, however if obdmaster solution does not work out I will send you the files requested.

Darwins

darwins
22nd July, 2011, 11:13 AM
Thank you obdmaster your file worked 100%

juan255
19th September, 2011, 03:17 PM
Hello.

I have an ECU with the equal number SID 801A.

friends, Can You send me pasword?

this is my file of the 93c56

thanks.

ernesto1670
29th December, 2011, 01:33 PM
My file original.
Send reading 8 and 16 bit, I think the right is 16, but not this very safe.
tks

sorry for my english

obdmaster
29th December, 2011, 01:39 PM
My file original.
Send reading 8 and 16 bit, I think the right is 16, but not this very safe.
tks

sorry for my english

All done m8:call:

ernesto1670
30th December, 2011, 10:29 AM
All done m8:call:
Work 100%

Thanks

argegsm
30th December, 2011, 09:59 PM
need immo off thanks

MEH
20th February, 2012, 10:21 PM
hello

can someone remove immo for my sid801a please?
i will post the dump

maki
30th October, 2012, 02:37 AM
Need help for partner SID801A 5ws40155c-t,where is eeprom in ecu,if can picture and please password for immo off obdmaster.

Thanks!

maki
31st October, 2012, 11:04 PM
Please immo off for my file...thanks!

maki
31st October, 2012, 11:07 PM
original file here...

doctordiag
1st January, 2013, 03:41 PM
i need help immo off siemense sid 801a

senseis
11th February, 2013, 09:26 AM
Try this my m8, post results. pass in pm.


i need 801a immo off solition

please pm send me

obdmaster
10th June, 2013, 08:20 PM
immo off sid801a pm for pass

dgmcan
25th June, 2013, 11:42 AM
I need berlingo with sid801a immo off

or pass for the files

houcem80
8th November, 2013, 08:00 PM
hi my frind
plz give me the pass

best regards

houcem80
8th November, 2013, 08:02 PM
immo off sid801a pm for pass


plz give me the pass

drewdom
21st November, 2013, 01:47 AM
Hi.Can you make immo off for me obdmaster (http://www.digital-kaos.co.uk/forums/members/84970-obdmaster/)?:blue: This is peugeot 307 SID801

Doru Lucian
22nd November, 2013, 09:13 PM
please immo off for me this 307.file.thanks

gttuning
22nd November, 2013, 11:57 PM
Hi.Can you make immo off for me obdmaster (http://www.digital-kaos.co.uk/forums/members/84970-obdmaster/)?:blue: This is peugeot 307 SID801
immo off pass.pm

gttuning
22nd November, 2013, 11:58 PM
please immo off for me this 307.file.thanks
what ecu? sid???

Doru Lucian
23rd November, 2013, 08:05 AM
sorry.sid 801 A. 5WS40045B-T. THANKS.

gttuning
23rd November, 2013, 10:04 AM
please immo off for me this 307.file.thanks
immo off.pass pm

Doru Lucian
23rd November, 2013, 07:36 PM
thanks ,,,,try all readi this solution --IMMODECODING,DATA EXPORER MANAGER,etc etc.not work for me.i thing i have problem with 29f400,maibe corupted ,i kant erase error from ecu.

gttuning
23rd November, 2013, 09:11 PM
you must have some other problems.what errors?

Doru Lucian
24th November, 2013, 12:37 AM
all wiring check .ok,krankshaft senzor report as error but in live data is ok. and cuple other errors that are not real,dont erase.Some time ago i was having the same problem with an sid 801simple ,withowt A.and I fixit with change 29F400,from another sid801 ho was smashed,from scrapyard,ofcourse with immo off done,and after change the 29f400 the error was erase ok.

tisser
11th December, 2013, 05:08 PM
PLEAS IMMO OFF THANKS

houcem80
19th December, 2013, 11:44 AM
i have berlingo ECU with number SID 801A.



my file whith 93c56

best regards235718

cristecristian
14th January, 2014, 04:31 PM
I need berlingo with sid801 immo off

daviee
7th June, 2014, 10:33 AM
Can you make off this dump also please?
Thank you

reproteq
31st August, 2014, 03:22 PM
please can tell me pass.
thanks alot.

constan
9th March, 2018, 04:35 PM
Hello,can you get me password for this file? thanks.

rafal
9th March, 2018, 05:01 PM
Hello,can you get me password for this file? thanks.

post dump...............

constan
12th March, 2018, 12:20 PM
Hi,it's a Peugeot Partner. I tried to do IMMO OFF with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data,or swap. Thanks
513112
Hi, it's a Peugeot partner. I tried to do immo with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data and swap. GaciasHi, it's a Peugeot partner. I tried to do immo with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data and swap. GaciasHi, it's a Peugeot partner. I tried to do immo with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data and swap. GaciasHi, it's a Peugeot partner. I tried to do immo with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data and swap. Gacias

CarCity
12th March, 2018, 12:29 PM
Hi,it's a Peugeot Partner. I tried to do IMMO OFF with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data,or swap. Thanks
513112
Hi, it's a Peugeot partner. I tried to do immo with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data and swap. GaciasHi, it's a Peugeot partner. I tried to do immo with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data and swap. GaciasHi, it's a Peugeot partner. I tried to do immo with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data and swap. GaciasHi, it's a Peugeot partner. I tried to do immo with Carlabimmo and it does not work, I think there is some problem with the 8-bit or 16-bit data and swap. Gacias

.................................................. ...

constan
12th March, 2018, 08:30 PM
This is the file

CarCity
13th March, 2018, 05:01 AM
This is the file

PIN : JHAY
Your immo off :

constan
14th March, 2018, 01:29 PM
Hello, everything works well, thank you very much CARCITY. I have done the same but I was wrong with swap and I did not see it. With what calculator has he done it? If it can be known. Thank you very much

Helder Costa
6th December, 2019, 03:10 PM
Try this my m8, post results. pass in pm.

pass please.

Helder Costa
6th December, 2019, 03:11 PM
PIN : JHAY
Your immo off :

pass please