digivox ireland

[Brett69]

Help guys! I live in Lahinch co Clare need to get my Digivox-t up and running again need firmware or new codes can anyone help. on NTL MMDS

if i have codes how do i install them cos i have been given 2 lines of number sequences do i install 1 line or both lines at the same time?

[caveman_nige]

have you tried any of these

http://www.digital-kaos.co.uk/forums/f10/digivox-firmware-v3200-t-mmds-9770/

http://www.digital-kaos.co.uk/forums/f10/digivox-firmware-au-fixes-30-11-08-a-15393/

[bassman]

I got mine running again, just inputting the new c*des from keym*aster, you should get running again using info attached, they haven't done a new firmware yet as far as I know :santaclaus:
:wink:

[Brett69]

have you tried any of these

http://www.digital-kaos.co.uk/forums/f10/digivox-firmware-v3200-t-mmds-9770/

http://www.digital-kaos.co.uk/forums/f10/digivox-firmware-au-fixes--a-15393/

yes i tried reinstalling v3200 and also uk fix but neither worked

thanks for the info.

[Brett69]

I got mine running again, just inputting the new c*des from keym*aster, you should get running again using info attached, they haven't done a new firmware yet as far as I know :santaclaus:
:wink:

thanx bassman will give these a go a little later have to go out at the mo so will let you know how i get on later.

[Brett69]

thanx bassman will give these a go a little later have to go out at the mo so will let you know how i get on later.

hi bassman tried the c*des i have but they do not work any chance you could mail me the ones you used in a PM cheers.

[bassman]

Sorry meant to pm

[Brett69]

Sorry meant to pm

Those were the codes that i had.Tried them twice with no luck.

thanx anyway matey will have to keep looking.

[pudzy]

ok brett, first of all your on cho8us mmds if you live in that area, so input cho8us key code , you must be new to this surfing area

[Brett69]

Thanks,yes I am new to the area but have tried inputting the c*des for both NThell and Ch8rus with no luck.The c*des that are about are they for the Digivox-T or other Digivox models? If you have any other info that you think might help could you PM me please:

[pudzy]

if you have digivox t code for ch8rus code will work, press menu, press system info, type 1969 press nagra , then input code, press ok to save then exit, starts with ce , if you try that one again

[pudzy]

if you have digivox t code for ch8rus code will work, press menu, press system info, type 1969 press nagra , then input code, press ok to save then exit, starts with ce , if you try that one again ,

[wozzo]

Inputting the codes is only temporary, they keys will roll every day or two.


A fix is needed for the terrestrial boxes, one was not made as they dont use MMDS in the UK, so when it hit them 2 weeks ago no such fix was made.

[Brett69]

if you have digivox t code for ch8rus code will work, press menu, press system info, type 1969 press nagra , then input code, press ok to save then exit, starts with ce , if you try that one again ,

thanx your a diamond! worked this time back up and running.

[caveman_nige]

nice work guys, good to hear you up and running again..

[bassman]

thanx your a diamond! worked this time back up and running.
Good news!
Did 1969 work on your box? my digivox t is 1004, the keys hadn't changed in Ireland for a good few months up until a few days ago.

[markarman]

hi all,

the codes were rolled on the 18-12-08

V4200 software is a fix that works in the u.k. i have tried this but no joy in dublin. it seems the only way currently is to manually input the codes. which is all well and good but.............

i have a dreambox dm500c and the new image for that is working fine, autorolling coed updates and everything. i guess we will all just have to wait until the new firmware for the digivox is created with the latest fix.

any ideas as to when we can expect an irish fix?

Thqanks guys keep up the good work.

Mark ..

[morty22]

hi guys,just wondering would someone pm the codes for digivox t for ch8rus mmds.thanks a million.

[pudzy]

JUST DID, all the best

[markarman]

it seems V4200 software will autoroll.

just speaking to someone on another forum and when he flashed this software he never actually manually input the codes, instead he tried several different channels until he found one with a strong enough signal that it started auto-updating automatically.

me being the impatient so and so i out the codes in manually.

this should mean that as and when they roll the codes again (probs just as the wizard of oz is starting on christmas day lol) the V4200 software will autoroll with the new codes.

sending this box back to my aunt tomorrow so i wont be able to verify this. if anyone else has used this fix i would be interested to hear if it does autoroll.

good luck

Mark ..

[HiTeck]

Just forwarding some info regarding this type box, the firmware is out for Digivox T thanks to SunRise.

Available here > digivox_ter_v3300.bin (http://www.4shared.com/file/77180743/9d9eafbd/digivox_ter_v3300.html)

I know nothing about these receivers so please dont ask me I'm just sharing the info :)

Thanks.

[vmd1916]

thanks hitec will try tomorrow ,let you know how it goes ,anyone gets there before me keep us posted on results ..thanks again i need sleep:vollkommenauf:

[padb]

decent. thanks