PDA

View Full Version : opel car300 safe


umut60
21st July, 2011, 05:02 PM
GM1300V6702986 code vectra b
guneymemo
21st July, 2011, 05:04 PM
safe????
have you got a code.question for only code entry??
guneymemo
21st July, 2011, 05:14 PM
AS key must be held in while switching on the set. The set should then display 'SAFE' briefly followed by '10 - - - -'.

Press preset 1 button repeatedly for the first digit
Press preset 2 button] repeatedly for the second digit
Press preset 3 button repeatedly for the third digit
Press preset 4 button repeatedly for the fourth digit

and finally press the AS button to accept.
umut60
21st July, 2011, 05:21 PM
Thank you just going to try
umut60
21st July, 2011, 06:30 PM
7 safe, what can I do write
fodortms
21st July, 2011, 06:43 PM
You need reading the Motorola MCU!
The sec. code stored in MCU eeprom!
BR.
arık
21st July, 2011, 06:46 PM
read mcu MC68HC05B16
code and have to reset..
umut60
21st July, 2011, 07:01 PM
MC68HC05B1 I read the file send
Fradebo
21st July, 2011, 08:25 PM
7safe gives a wait time of about 20 minutes ....

grtz Fradebo
umut60
22nd July, 2011, 06:57 AM
Open 7 would generate safe, break contact, and 14 minutes of tape I will wait for spontaneous
---- And then write the code as the key voice he will hold the d***305;ttt done. Thanks to everyone