2009 vauxhall insignia help

[dave11674]

hi guys

did a search for the above car

now to what i believe its a 24c16 eeprom
algo is km x 64 > hex
and to what ive looked in the dump of the bsi its in 3 locations in a reverse byte.
so say if the value in hex ia AB CD EF it shows in the dump as EF CD AB

also i only need to do the bsi and this will reprogram the clocks right ?
do i need to disconnect the battery ?

thanks for the help

dave

[vageric]

short anwser, yes

[TULGEYWOODMAN]

hi guys

did a search for the above car

now to what i believe its a 24c16 eeprom
algo is km x 64 > hex
and to what ive looked in the dump of the bsi its in 3 locations in a reverse byte.
so say if the value in hex ia AB CD EF it shows in the dump as EF CD AB

also i only need to do the bsi and this will reprogram the clocks right ?
do i need to disconnect the battery ?

thanks for the help

dave
If you have looked in the dump of the bsi, then you had the bsi out,
Did you disconnect the battery?

[dave11674]

Thanks for the replies.

Ive not touched the car yet mate.

Ive looked at threads in here using search first :D and looking at other dumps posted up.

So is battery disconnected ?

Thanks again

Dave

[smartymarti]

Once you have noted original mileage disconnect battery and then start your strip out time it take to get bsi out should be enough to let it go to sleep properly

[TULGEYWOODMAN]

Thanks for the replies.

Ive not touched the car yet mate.

Ive looked at threads in here using search first :D and looking at other dumps posted up.

So is battery disconnected ?

Thanks again

Dave

as Martin says....yes

[dave11674]

thanks guys :)

dave