Log in

View Full Version : Seat toledo 1.6 (MM IAW 4MV) pin code needed



Fec001
21st July, 2011, 05:36 PM
Hi everyone!
I need pin code for this ECU. and I'm very greatful if someone tell me the repairing procedure of the car (because immo off not pissoble as I read here). Car doesn't start and immo lamp blinking.

haroutioun
21st July, 2011, 07:54 PM
Hi,
your login is (04534) after try to go immo system and write 00 after ok or save ,it must start if not plz see what is the fault....?

Fec001
21st July, 2011, 08:25 PM
Can you tell me how can I do it with VCDS 908 please?

haroutioun
21st July, 2011, 09:10 PM
Can you tell me how can I do it with VCDS 908 please?
------------------------------------
1) Hi, Dear friend yes i can tell you how....you have to try in many steps to get solution...
2) Select
17 - Instruments after Adaptation - 10
Enter 00 in Channel Number
Read
Save
Done, Go Back
---------------------------------
3) or if your system with immobox try the same go to 25- immobilizer Adaptation - 10 after Enter 00 in Channel Number
Read
Save
Done, Go Back
---------------------------------
4) about to enter your pin go to 17 Instruments after 11-login write your pin after Adaptation - 10
Enter 01 in "Channel Number" (if not available use Channel 21).
Read, after write number of keys currently matched.after
Save
Done, Go Back,
if any wrong plz let me know
Good Luck......

Fec001
21st July, 2011, 09:30 PM
thank you! I will try it on saturday!!