Super VAG K+CAN Plus 2.0

[technobox]

u try take of dash fuse

[gjuzel]

yes 2 min.but noting.

[ttzag]

Where can I find the fuse of this car A8 2005 3.0 ,,,is there a photo please?

sent from one s

[diagnoza_auto2000]

This tool have no future!

[diagnoza_auto2000]

Guys Audi its not VW!
VW its with NEC or Micronas but AUDI not!

[MACKIE]

Hello my friends
Adjust odometer for audi A8 2005 with this tool ,,update success but nothing happened in dash !

sent from one s

What firmware is inside ?

Regards
Mackie

[MACKIE]

Guys Audi its not VW!
VW its with NEC or Micronas but AUDI not!

Yes you're right....

Regards
Mackie

[ttzag]

What firmware is inside ?

Regards
Mackie

6.2.0

sent from one s

[Ding-Dong]

guys!!!!!!!!!!
y not buy a cheap and best tool (like smelecom's vag prog)
rather than making the posts regarding the tools failures and successes
u all know that this Chinky stuff will never gonna do like all other original tools
so y r u wasting the time and money on this Sh*t ??

regards

[MACKIE]

That is true.... :D

But this is thread about one chinese product...must write couple words..;)

Regards
Mackie

[MACKIE]

6.2.0

sent from one s

You must wait for new update...this version not work...

Regards
Mackie

[paul_12345]

guys!!!!!!!!!!
y not buy a cheap and best tool (like smelecom's vag prog)
rather than making the posts regarding the tools failures and successes
u all know that this Chinky stuff will never gonna do like all other original tools
so y r u wasting the time and money on this Sh*t ??

regards

wheres smelecom based?

[aloka]

2012 model audi a5 2 .0 miles accounted motor vag com Have tried to do

[Ding-Dong]

wheres smelecom based?

also a chinese
but the products r genuine and not clones
SMELECOM (http://www.smelecom.com)

[Fallen]

What is super vag k+can a plus a clone of?

I have had it pull pin codes from old VAG where my AD100PRO has failed.

As far as I can see, this is an original tool produced and developed by X-horse.

[zfkd]

Does anyone have the pinout of the cable from D-Subminiature to OBD Please.
My cable is no longer connected

[digimile]

hi
is supervag k+can 2.0 can do cars after 2007 like octavia ...and other skoda asian versions...
thanks

[darrenhyland]

hi
is supervag k+can 2.0 can do cars after 2007 like octavia ...and other skoda asian versions...
thanks

To give you an honest straight answer i would compare the reliability and accuracy of this tool to target shooting at the Helen Keller Institute.:stupido2:

[gjuzel]

i ned from update
i tested update and not works try these works 100%

[darrenhyland]

Got fed up waiting for 'warranty':boring: for my faulty unit which failed 90% of the time......IMMOKM.COM dont give a s""t about you if you got problems afterwards....couldnt even get a return address from them to send the unit back for repair....so i stripped my unit and found the problem....the obd cable was made from crap wire with about 4 strands in each....no damage on the outside but continuity check showed the white wire broken....solution was to use an old autocom cable and all is working....well 'working' as best a chinese tool can....but definitley my 'init failed' issue sorted!!!

[ttzag]

Oktavia 2010 nec + c64 done in 5 second


But It is better to separate the battery cable for tow minute before starting to work

[Ding-Dong]

Lucky u r....
as mine does not do the nec+24cxx versions:banghead::banghead::banghead:

[kalelarga]

The unit is mostly OK. All older models via K-line KM correction on panel and Engine ECU is going well.
Golf 6 2009 KM corr. OK, passat 2008 OK, Skoda 2008 OK, Golf 5 2005 (not visteon) OK...
Airbag reseting pasat 2002 OK (error code 65535).
I did not update because I fear it will block. Version is from September 4.xxx 2011th
On CAN vehicles not add a new key.
Golf 5 VISTEON 2005/10 km correction and pin read does not work.
Audi A4 B5 2004-2006 I tried to do. Earlier I was with Dash Vag K + CAN 5.5 killed one page RB8.
:bounce:

[kalelarga]

My SupervVag K+Can 2.0 plus is sw4.03 and was purchased by obdfactory oct.2011.
Can someone tell me if I could update it or not?
:stupid:

[reuf]

corect km A6 4f0 910 930c dash M73 H18 ,test or anyone try?

[miha99]

I can confirm that on A6 4f with M73 it works 100%.

[autotechnique]

hello i try to do a vw sharan model 2008 and audi a4 and a5 model 2011 but it is not ok evry time it give me error 13
if some one can help

[Harrycz44]

Hello I have problem with this tool. After start show me Error SPI, I tried updated but not succesfully...

[didzej]

What situation is with read/write engine eeproms?
EDC15/EDC16/ME...
Read/write km/pin/immo off/on ?

Regards
DJ

[arvedo]

hello friends I have a problem I changed km to a audi a4 2006, change the miles but now the car lcd aparace in the 3-3 and do not see the new km, remove the battery aparese km ok, but when you start the car again 3-3 appear as anyone can tell me to do in this case. Bosch is a dash Rb8 with eprons 95640.

[lupu_sandu]

Audi have 24c08 in RB8 dash.
For your problem with LO 3-3 one word: SEARCH on forum and you will find your answer.
10 seconds and you will be able to repair dash with super shit.k+can

[ALEXEI]

restore immo state with option from your tool

[weske2000]

Super VAG K+CAN Plus 2.0 kill audi a3 2006 dash

[diagnoza_auto2000]

Good tool ,if you want to broke some cars

[arvedo]

Hello friends someone can pass me the link please do not find it, I searched but I have no success, can be repaired with the same dag vag super plus

[ovi_dk]

Super VAG K+CAN Plus 2.0 kill audi a3 2006 dash



On forum i wrote this!!BECAREFULL WITH AUDI A3 2006,DONT TRY TO MAKE WITH SUPERVAG,WAIT FOR NEW UPDATE WHEN WILL FIX THIS BUG!!If u dont read its your mistake,by the way on a loat of sites say this too,go on ecutool.com and read wath they say!!The same as wath i say!!No a3!just old type!!
Regards

[diagnoza_auto2000]

Very good tool,if you want to kill dashboards

[ovi_dk]

Yess m8,evryboade have money to buy enigma,avid,x can .,,,etc!For me worck ok this tool till now and make all money,i dont f......up dash with this tool,so im hapy to have!!If u dont like it dont buy:)))))
Btw,evry tool need a user,if user dont know use a tool and not read all info abouth,its not tool mistake when user f...up one dash!!
Regards

[diagnoza_auto2000]

Its AVDI m8,not AVID please..

[lupu_sandu]

Is a good tool 'ntill you ~~~c'up one RB8 dash or even worse Audi A6 2007+, then let's see your opinion about this tool.

[Meat-Head]

RB8 dash or even worse Audi A6 2007+, .

What is so special about A6 2007+ - is the circuit board made out of cheese or something?

[toximatic]

Any of you tested the vag km+immo chinese cable ?


Regards all

[ovi_dk]

Yes right:D,but untill now nothing wrong,and i make rb8,and audi a6 2008,and guess wath??The tool make good jobb!I know guys dont agree with this sheet tools,but here all its abouth wath worck and wath noo!!And like i said,the tool need a user:)I saw guy who make one car die with AVDI and the suport was greath,buy a new dash:D,so?We speack abouth a tool wtah cost 250 usd not 2500 euro!!Wath should do one cheap tool??Mercedes 2013??Come on,its normal coz its not a hight tool,but for this money make a loat of good jobb!!Its just mi opinon!!
Regards

[ovi_dk]

What is so special about A6 2007+ - is the circuit board made out of cheese or something?

:laugh::roflmao::roflmao:
:beerglass:

[Meat-Head]

:laugh::roflmao::roflmao:
:beerglass:

OFF TOPIC:-

Had an Audi ECU it was like a circuitboard PRINTED on a plastic bag, that's all.

What is so nasty about them?

[strato]

Very good tool,if you want to kill dashboards
What you have:Dp3 or Enigma,Genius!

[diagnoza_auto2000]

I use Super Digiprog clone and Super vag for all cars.
Its that what you want to hear?

[ovi_dk]

I use Super Digiprog clone and Super vag for all cars.
Its that what you want to hear?
GOOOD JOKE M8

:roflmao::roflmao::roflmao::roflmao:
Avdi,smok,and much more tools oem!!
Wi dont tell the true?
U use this china tolls just for fun!!!:captain:

[strato]

I use Super Digiprog clone and Super vag for all cars.
Its that what you want to hear?
kenjas mnogo!

[maruti]

skoda RAPID new, year 2012, how to do with super vag-k-can for odometer correction

thanks

[Ding-Dong]

try this blue toy and let us know

[arvedo]

vag can super friend with audi a3 2006 without lcd dash in the center can change the script and change EDC16. 100%

[scanner_man]

very very good feedback to us. I read all of this threat, and I understand that we can work with this tool, but before need know some things to no broke some dash, just all. It's a cheap option to can work fine with no lot of money. In my case I work with a lot of cars, but only diagnose and some advance functions like this (km, inmo off, etc). I spend lot of money buying diagnose tools, and I'd like have some experts tools to do more work and, obviusly, get more money. But here (my city) have a couple of guys that can do this work, but the cost to work with they is very very expensive, and the most of case I can get no money, because the final cost to client is so expensive and prefer that they speak directly from they.
I understand that we can not do all of the work with only a tool, but it's a good option to get some work directly with no lot of money on tools. Anyway, we know that we have always buy a new tools, new updates, if we want have the best service. Like me, I have an original spanish version of VAGCOM, no chinesse, I have to pay licence all of years, but is the way to do the best work.

[karalada]

Tested Seat Altea XL 2010 year NEC+24C64 - 15sec OK!

[TOINO]

tested in passat 2006 ok work fine

[huzzen27]

Tested on Q7 2009 and Audi A42008,worked perfectly

[Ding-Dong]

any one with a reliable seller to buy this Blue toy??

[andersonmaxi]

are u Tested on seat leon 2010 ??

[randomlog]

are u Tested on seat leon 2010 ??

i test on leon fr 2009, all ok.

[Tachotony]

Hi All

i did golf 4 VDO problems after programming blink the km in display problem the tool write 0060 and 0070 only 0070 id enough
and I tray VW T5 it can read information but no programming
golf 6 2012 no problem
Passat 2007 no problem
immo edc15 no problem

Regards T

[technobox]

audi a3 2009 dont making kill dashboard

[aloka]

Correct the 2011 model Jetta TSI engines know her wolswagen miles

[antibisic]

Hi All

i did golf 4 VDO problems after programming blink the km in display problem the tool write 0060 and 0070 only 0070 id enough
and I tray VW T5 it can read information but no programming
golf 6 2012 no problem
Passat 2007 no problem
immo edc15 no problem

Regards T

Which year was T5?I have to work on the one 2007-8 year

[technobox]

t5 not working mate i m trying alotof time not support 2007-08

[infobadr]

Hi I tried updatimg my super plus vag K+can
the other night and it stopped about 12% of
the way through, now it just keeps

(((( serious error 00000010 40000E44 B9205RA0
FFFFFFFF 400031 48 00032A58 40003F90 FFFFFFFF 0FF324CF))))


I have disabled my antivirus software,
and tried the slow option,try with another computer
but nothing seems
to work, does anyone please know what can I do now??

MY Super VAG K+CAN Firmware V6.1.8 released (2011-11-01)


Thanks

[darrenhyland]

Had the same problem mate.......my 5 year old now has a new blue toy:laugh:

[solar]

MY Super VAG K+CAN Firmware V6.1.8 released (2011-11-01)

I think 6.1.8 was best version of this tool??But now if you have error in you tool,you have one option only....keep trying....again and again,and again.....and finally you update your tool.Sometimes good to try with couple laptops.

[Vatan]

Dear
I have 6.20 version
How new version for this?

[TOINO]

I bought vag k + can 2 audi a3 2004 with 93C86 does not work
odometer
passat 2006 km correction works ok

[karalada]

For now,6.20 is the latest version

[TOINO]

a3 2004 with 93c86 d ont work

[infobadr]

YES DEAR FRIEND AUOBD2 COM I NEED SOFTWARE UPDATE
for Super VAG K+CAN Plus 2.0
THANKS

[autotechnique]

tested on audi a4 model 2007 it is not ok and polo model 2010 NOT OK
it gives me error 13

[autotechnique]

tested on audi a4 model 2007 it is not ok and polo model 2010 NOT OK
it gives me error 13

[golenam]

Seat Altea XL 1.9 2009 Km OK EDC OK
Passat 2.0 140cv 2008 Km OK EDC Not
Golf 1.9 TDi 2006 Km OK EDC OK

[ttzag]

Hi all
Last week I do a ten cars with this tool
some of them done and some not done
all of them is skoda oktavia 2010-2011.
so, with cars that didn't done you must connect your VCDS and reset the service due even if its not appear in the dash before you starting to work ,then its done.

[quinnd]

Read pincode and programmed spare key to VW Passat 2004 today. I love it when things work. Although took a bit of mucking round to stop immo light flashing. when entering # of new keys, first I put 1. Added new key, them immo light flashed with original. So then # new keys, I enter 2. But program first key but then it doesnt wait for 2nd key, only says "success" and exits. Eventually got both keys done ok with no flashing

[gjuzel]

audi a4 rb4 11.2001year ....dash km ...ok

[gjuzel]

tested passat 2008 tdi not works!
I MAKE 2 two passat 2007 2008 works perfekt dash change km.

[omi1980]

Somebody try on SUPERB 2010?I think is 24c32 ??

[quinnd]

Other day I tried to program used ID48 key to 2001 A6, PIN of cluster read as 5####, then went to key learning, PIN there already, FAIL in odo screen and later still fail on supervag screen. Is it possible to have PIN beginning with 5? Cluster works all fine

[sunny123]

i also got one ,but this tools can't do audi well ,and the seller tell me not do car before 2007

[Nierka19]

what about touran 2003-2005?

[omi1980]

what about touran 2003-2005?

no problem with touran from2003 -2010

[sunny123]

what about touran 2003-2005?

no problem with touran from2003 -2010 ,but this blue toy can't do Audi .

[kuzmichh]

Somebody knows, it is possible to downgrade software to version 6.1.8 ?
I have 6.2.0 and I think V6.1.8. is better.

[solar]

its do audi cars,maybe problem only with a3 from 2007(with a3 2004-05-06 work ok),a4 rb4,rb8 ok,a6 ok,a5 some ok,some not change...

[sunny123]

its do audi cars,maybe problem only with a3 from 2007(with a3 2004-05-06 work ok),a4 rb4,rb8 ok,a6 ok,a5 some ok,some not change...

Oh ,i got one can't work on my Audi cars ,then i contact the customer service ,they said factory haven't develop the whole function to do Audi cars ,so i am afraid to do it .

[ciptel07]

HELLO , IT IS SAFE TO USE FOR TUAREG 2005 DASH RB ?

[digimile]

hi
VW vento 2013 not work...show old km but fail to update new km....any help...apperciate.....thanks

[darrenhyland]

Guys the problem is that this tool is a good tool but it is under developed and thus risky at best...............I wouldn't try it on much after 2012 and then only if I KNOW I can fix it if it f$%ks up.................key proggin is ok and it has pulled pins on a few cars my other tools couldn't...........but still too risky for those who don't have back up artillery for the inevitable 'dash crash'.

[sunny123]

hi
VW vento 2013 not work...show old km but fail to update new km....any help...apperciate.....thanks

you use which tools ?

[teuton]

you use which tools ?



mhmm, which tool is this thread about?

[diaginjecteur]

I HAVE PROBLEM WITH Super VAG K+CAN Plus 2.0 : XCPU ERROR CODE=-7
same help plais

[viki300]

dont use this tool to VW golf IV with RB8 i try it and screw up badly hole dump ,or make sure that you have good back up dump

[ganker69]

yeah mileage starts to blink, reason: does change mileage at wrong address, read with eepromer and put 0060 all FF b.r. Ganker

[zckariya70]

i also use super vag can but i use it for airbag crash data removal and odometer correction only for vag cars i dont update it works fine and good

[pletik]

Golf 4 with BPV and RB8 mess dump but not all... only one line of file above place where km is located. Than odo flashing... wrong checksum. If someone have this problem, I can help him.

[alle bmw]

​HelloSuper VAG 2.0
Mise jour
2012 / 01-14
V.6.2.8
A question if it's the latest version THANKS
BUY IT OUT 2017

[alle bmw]

Peace, mercy and blessings of God

[alle bmw]

mireda mireda

[alle bmw]

super vag k+can plus 2.0 golf5 2008
no ona mireda

[alle bmw]

super vag k + can plus 2.0 golf 5 2008
OK
golf 6 sec 64 of 2 sogande
all this pour le cabeli

[alle bmw]

[QUOTE = diagnoza_auto2000; 1608908] ¡esa herramienta nunca funcionará bien! [/ QUOTE]
pour mi es lo mayour pour pericio

[alle bmw]

tourane 2004 ok

[alle bmw]

cabele mal

[Kayhan 17#]

Can anyone post a picture inside of his vag can plus device?
I think i got scammed as there is in the right lower corner "supervagkanv4.6.." printed, can someone with a working device confirm his device does not have that on his board printed?

[volorucinski]

Can anyone post a picture inside of his vag can plus device?
I think i got scammed as there is in the right lower corner "supervagkanv4.6.." printed, can someone with a working device confirm his device does not have that on his board printed?

Take a look here

[Kayhan 17#]

thank you mate, if you have the device opened, could you also take a shot under the Display and/or confirm there is a FTDI like chip?
So in this case it doesnt matter whats printed on the right corner :rolleyes-new:

[volorucinski]

I've close it up... I didn't took a look under the display... I will unscrew it tomorrow and send you a pic... Attached are all the pictures i've made... Post edit: wtf, i was also curious... Other pictures added. Under that accu lays an ic. I will not desolder the accu to see what type it is.

[Kayhan 17#]

Yours differs there totally from mine, i will make pictures when im at home =)
Thank you very much

[Kayhan 17#]

I attached the pictures...


If you go to NEC in the Menu, does your device also say "Reserved"?

[xln]

do you know if there is any new update for this equipment?
My version is v6.2.0 2012-01-14



The ubdate till now are free,maybe they will put more cars in future updates/
B.R

[volorucinski]

I attached the pictures...


If you go to NEC in the Menu, does your device also say "Reserved"?

At mine is not Reserved. Yes, updates are free, but only for the original, i suppose. A clone is 40-50eur, an original is 200euro in my country.

[lucas39]

it can not be updated anymore. Chinese disabled the website http://www.x-horses.com/

[Rusnem98]

801435 hello guys, i need help...is it possible to use vcds with this cable or its only for fiatecuscan??thankss

[d.zio]

Hcan anyone help with pinout of obd and machine db plug pinout cable???mine is broken and i need to fix new cable...

[pppm]

Hi, has someone expirence with the SuperVag Plus 2.0 V6.2.0 and the 1T0920854B (VDO) Dash (Caddy 2K 2009 1.6 petrol & Touran 1T as far as i know)?
I try to read out PIN and CS to make extra Keys (I have working Keys but i want more).
Or does Someone know what kind of Dash that is (Micronas, NEC 3297.....?)? Is there a way to figure that out without removing the Dash?

Thanks in advance!