AUDI A4 RB4 DASH NEED DUMP!!!

[mariusz971]

Hi guys,
I tried read pin code from dashboard throu obd2 (bad idea) and now cluster show me error "DEF" and immo light is on. Please if any one can help me to find dump or fixed my original. I appreciate any help
Audi A4 2003
8E0920900L
RB4 D36
965-RB4 29

[ION CRISTI]

not work with original dump. flash is corupt. must virginizide the instument cluster it is solution.

[mariusz971]

Thanks Ion for sugestion but can you help me please to understand what you mean "virginizide the instument cluster" or the procedure how to do it? Multumesc

[haroutioun]

Thanks Ion for sugestion but can you help me please to understand what you mean "virginizide the instument cluster" or the procedure how to do it? Multumesc
------------------------------------------
Hi, friend
you must have special tool for rb4 dash, to repair your def error
with this tool you can do (virgin new your dump) or repair your dump of the dash, the name of this tool is (dejavu) http://dialab.ee/dejavu Support .but if you want to start your car fast before repair your dump ,& if you have idea how read eeprom from engine ecu read it,after any from DK friends can help you, to return your dump immo off. any new plz write...
Good Luck...

[leaserhu]

Your file VIN not correct

[mariusz971]

Guys, thanks for replay. Yes, I have turned off immo in the ecu and the car is running. So for fix my cluster the only one way is to buy dejavu?

[mariusz971]

Hi leaserhu, about that file what you sent. I have to put the vin number in hex and try to reprogram my dash? thanks

[T72]

car runs, but "def" on dash, clima do not work...

[mariusz971]

what you mean?

[afonso rico]

hello
what they mean here is that you did mess up
and to solve such problems, you must have good tool to do

[haroutioun]

car runs, but "def" on dash, clima do not work...
T72:
what you mean?
--------------------------
Dear mariusz971 , (T72) HE Mean if you dont repair your dash you get fault wich he write above .
dear you must buy dejavu to repair your dush after all well be solvet....
Good Luck....

[TULGEYWOODMAN]

Just find someone with enigma,
treat it as mileage correction via obd2 and all should be well.

[mariusz971]

I have Enigma tool (full option) and I tried but no success. Even Enigma support told me to take dejavu. Thank you very much guys for any help. I hope that I can be usefully too in the future

[turbo965]

Try and report...

thanks

pass in pm

[TULGEYWOODMAN]

Try and report...

thanks

pass in pm

and the result was success?

[mariusz971]

Thanks turbo965, I tried but still nothing change. When i loaded this file, dash show me "DEF" and "Error" . When I adjusted the VIN number and tried again, dash show me only "DEF". Maybe if I can find the pin code in this file so I will adaptation with VagCom?

[z786]

where you based?
PM me i can help you

[lordko]

Hey guys,

I've already read some threads in this forum, but it didn't really help me.

I changed the mileage of the dash from a friends car. It's an Audi A4 B6 3.0 petrol 2002 with color-display in dash.

After mileage changing, the car didn't start anymore and immo-light and esp-light are flashing. The car starts and shuts off after 1 second. Then I made immo-off, so that I could start the car. After about 5 seconds with running engine, the hazard light starts flashing and can't be shut off anymore. Radio and clima are dead. The changed mileage is shown in dash correctly.

All this has been done with "VAG Dash Can"

Then I tried to write back the rescue-file, Vag dash can made. But without success. File is only 132 bytes. I think it's corrupt.

I tried to adapt the Dashboard with VCDS, but it didn't work.

Now I've read out the eeprom 24c08 directly with willem programmer.

The login, I've read from ECU is 1870.

As far as I know, the eeprom is crypted. I know there is a good tool called "dejavu", but I don't have the time to wait for delivery of that device.

Can anybody help me please with this eeprom. Or send me a dump with working login, so that I can adapt the dashboard again to the car?

Thanks a lot.
regards from Germany
Mirko

File-Upload.net - a4.bin (http://www.file-upload.net/download-3667005/a4.bin.html)

File-Upload.net - RESCUE_8E0_920_930_S__KOMBI_WEGFAHRS__RB4_D35_WAUZ ZZ8E53A105761_____AUZ6Z0B0179377.bin (http://www.file-upload.net/download-3667006/RESCUE_8E0_920_930_S__KOMBI_WEGFAHRS__RB4_D35_WAUZ ZZ8E53A105761_____AUZ6Z0B0179377.bin.html)


http://www.digital-kaos.co.uk/forums/%3Ca%20target=%22_blank%22%20href=%22http://img8.imageshack.us/i/1140223.jpg/%22%3E%3Cimg%20src=%22http://img8.imageshack.us/img8/1453/1140223.th.jpg%22%20border=%220%22/%3E%3C/a%3E%3Cbr%3E%20%3Ca%20target=%22_blank%22%20href=% 22http://img89.imageshack.us/i/1140227.jpg/%22%3E%3Cimg%20src=%22http://img89.imageshack.us/img89/7268/1140227.th.jpg%22%20border=%220%22/%3E%3C/a%3E%3Cbr%3E

[haroutioun]

Can anybody help me please with this eeprom. Or send me a dump with working login, so that I can adapt the dashboard again to the car?
----------------------------------
Hello Dear freind,
if i send to you good dump with login ,it be the same error,without rezult after write the dump.
only the solution is dejavu,try to buy this tool....
Good Luck....

[mariusz971]

hi Lordko, for now you can turn off immo in ecu. You still will find the immo light on the dash but you can drive the car and meantime you can order dejavu or before (if you have) try use vag dash can

[lordko]

Hello mariusz971 and haroutioun,
thanks for your help. I've ordered dejavu and will drive the car in "immo-off-mode". I think it's the easiest way.
regards
Mirko

[haroutioun]

Hello mariusz971 and haroutioun,
thanks for your help. I've ordered dejavu and will drive the car in "immo-off-mode". I think it's the easiest way.
regards
Mirko
----------------------------------------
Hello,
good, this is nice to listen from you.
Good Luck...

[AudiA4180]

Hi turbo965, i have same problem with my cluster. I need this file too.
Can you give me the pass please ?

Thank's

[turbo965]

Hi audia4180 that file will not work. Pm me to discuss options

Sent from my SM-N910F using Tapatalk

[AudiS4]

Have you tried changing coding in instrument cluster to see if def error would be fixed??Change coding then change back see if its gone.