VW beetle magneti merelli cluster

[Solid2383]

Hi

I need to read dump from a 1998 vw beetle magneti marelli cluster. The chip is a motorola XC68HC711KG4 100 pin. I don't have a reader to read this chip. What do you guys recommend?

[key-maker]

hi my friend i think all vw beetle is 68HC912D60

[cleevesy]

i use mvp clone on these reads pin from instrument cluster and programs keys

[Solid2383]

MVPpro will not pull pin on this and the chip on the cluster is definitely XC68HC711KG4. I just need to know what I can read this chip with.

[haroutioun]

Hello friend.
you can read this kind of dash by OBD2 ,& this tool wich you can use it to read, is not to much monny 290euro go to this site and check it >>>Opel and VAG cars diagnostic software Reading PIN code by OBD cable! (http://www.opelinfo.com/)
Good Luck...

[Solid2383]

Hello friend.
you can read this kind of dash by OBD2 ,& this tool wich you can use it to read, is not to much monny 290euro go to this site and check it >>>Opel and VAG cars diagnostic software Reading PIN code by OBD cable! (http://www.opelinfo.com/)
Good Luck...

Thanks for your reply but i'm sorry to say we have tried vag tacho already with no luck.

[haroutioun]

Dear ,
you wont to get pin code from your dash? or you wont to read The mcu? if you wont to get pin code its good device & you get the login code without any problam ,but about show you mcu dump, yes he cannot show you,(only for adapt key + otometer calibration)

[Solid2383]

Not sure if you understand what i want. I just want to know which eeprom reader i can use to read the mcu on this cluster. The chip is a motorola XC68HC711KG4.

Thanks

[haroutioun]

Hi,
try to see this site .maybe can help you...
AUDI-VW immobiliser Login Code (Secret Key Code) Reader and Key Learning by diagnostic (http://www.codecard.lt/immo/audi-vw/audi-vw-immobiliser-login-code-secret-key-code-reader-and-key-learning-by-diagnostic/prod_20.html).

[keygargoil]

which vag tacho are you using the dash may be locked i hve 3.1 and it reads t5he beetle no probs, have you got k can hand held this will pull the pin or k can 3.6 or x prom with 9s12

[automan]

Hi

I need to read dump from a 1998 vw beetle magneti marelli cluster. The chip is a motorola XC68HC711KG4 100 pin. I don't have a reader to read this chip. What do you guys recommend?
upa read this mcu fine
br

[Solid2383]

Do you have a link for this programmer? Also can i immo off the ecu? If so which chip do i need to read from this ecu...


.http://i47.servimg.com/u/f47/11/77/76/68/dsc03610.jpg


Ecu part number : 06A 906 018 AB
Bosch number : 0 261 204 721

[Solid2383]

Anyone know which chip to read for immo off?

[haroutioun]

Anyone know which chip to read for immo off?
------------------------------------------------
Hi,
which you load hear,
Ecu part number : 06A 906 018 AB
Bosch number : 0 261 204 721
your BOSCH ecu with M5.9.2 ,& the ecu it must have eeprom 24c02.try