2001 Vw beetle Pin code.

[Moyshe]

Cheers.


Please help me calculate pin code. 2261 does not work., given by vag commander.



thanks

[teuton]

the pin code given by vag commander is calculated for ecu Magnet marelli with mc68hc912d60. If this is your engine managemant maybe the ecu is locked. In this case leave the car with switch open for at least 30 min. With VCDS youcould check for locking time.
If you got another ecu than MaMa, tell which one

[Moyshe]

Yes it magneti marreli. what should i do if its locked.?

[teuton]

Just leave the ignition in osition "on" for about 30 min at least. Do you have vag-com/vcds to check for locking times?

[Moyshe]

yes i have vag com. under which mode do i check locking times? what should i look for?

[haroutioun]

Hi ,
yes first you must to open ignition for at least 30 min.,which my friend (teuton) tell you above...
---------------------------
[Select]
[17 - Instruments]
[Meas. Blocks - 08]
Select Block 022.
[Go!]
The value in field 3 must be 1. If value is not 1, the key is not capable of being adapted to Immobilizer.
You can check each key in this manner.

Select Block 024.
[Go!]
Make sure the shown lock times in field 1, 2 and 3 are 0 (each field represents a time in minutes).


If the lock times are NOT 0:

Do NOT switch off the ignition!
Allow the car to sit for AT LEAST the number of minutes that were indicated by the fields 1-3.
ps:some times he show you (0) but you must open ignition on 30 minit after the dash begin to ready for adaptation...

[ivoo]

Some older models have an external immo.
You check with VCDS address 25.

[haroutioun]

Some older models have an external immo.
You check with VCDS address 25.
------------------------------------------------
Hi,
tha car is 2001 model friend,& the immo data login code is in the (17)instrument...