PDA

View Full Version : Professional EGR off File request MB Sprinter 906 115cdi



Mario32
27th July, 2011, 06:58 PM
Hi,

Can one of the experts that work with winols help me with EGR of file with no fault codes ore lost power.
The file is partical read with MPPS.

Vehicle specs:
MB sprinter 906 115cdi with DPF

Mercedes Ecu Type : BOSCH EDC16+/EDC16C
Mercedes Hardware ID : A 0014462702
Mercedes Hardware Number : 4005
Mercedes Software Number : 4209
Bosch Software Number : 1037383390
Programming Date : 19.11.06

Bosch
EDC16C31
1037505811


Thanks in Advance :top:

grinovsky
27th July, 2011, 07:44 PM
some one have do it before you m8
the egr is closed in dump
http://i43.servimg.com/u/f43/16/03/79/30/singe_10.gif

bobolin4o
28th July, 2011, 05:43 PM
I don't think so.
This dump and ori, that i have, is the same...

Mario32
28th July, 2011, 11:49 PM
The car goose one limp mode because of foultcode about the egr flow.
Is it possible that some one can turn the egr off permanently.

Mario32
29th July, 2011, 12:00 PM
Guys I realy need youre help one this one.

jovime
29th July, 2011, 12:34 PM
Closing the EGR on a car that has DPF active will not be easy, the DPF system relies on the EGR to work.

My recommendation is: take it to the nearest pro chiptuner you have, he'll need the car to test several files... but without deactivating the DPF, I don't think he'll have success.

Regards!

P2XA
29th July, 2011, 12:53 PM
remove dpf first for success!

Mario32
29th July, 2011, 01:01 PM
Thanks fore the advice guys.
I wil remove the DPF first from the car and after from the ecu with ecusafe.

Mario32
29th July, 2011, 01:53 PM
I have read in other posts that ecusafe don't work with these models can someone prepare me a good working DPF off file.

Thanks in Advance.

Mario32
8th August, 2011, 11:04 AM
I still need help with this sprinter can someone prepare me a good working DPF and EGR off file.

Thanks in Advance

grinovsky
8th August, 2011, 07:07 PM
this is what you ask for
pw.......pm:argh:

ninja123
8th August, 2011, 09:04 PM
i had a 2008 sprinter today with no power.
fault code for dpf sensor voltage outside parameter.

clear fault and drive good, but only for 1 min, then code returned.

live reading say last dpf regeneration was 20,000 km ago!!
and difference of 100 measure between in and out of dpf.
should i change dpf or just get rid of dpf??

van done 250k (miles)

ninja

grinovsky
8th August, 2011, 09:31 PM
remove the dpf and desactive it in ecu m8

ninja123
9th August, 2011, 05:02 AM
remove the dpf and desactive it in ecu m8

What reader will read and program this ecu, will galletto do this?

many thanks, ninja

levisdj
9th August, 2011, 07:55 AM
MPPS is the safe way to read/write.

ninja123
9th August, 2011, 07:51 PM
i just got price on new dpf and sensors, ill post again when i regain conciousness!!:dontknow:

ninja

Valuk
27th February, 2012, 08:52 PM
Mercedes Sprinter (906) how to programmatically disable the EGR, how much it costs and guarantee performance?

FiltersMurderer
27th February, 2012, 09:43 PM
raport work ????

Music73
10th April, 2012, 06:41 AM
Hi
I am having similair probs with a 906 311cdi getting faults for egr but don't really wanna throw ?300+ at it to find I have a DPF fault too.. it does seem to have been regen'ing through.. Anyways I have a kessv2 which I have used to read the ecu but according to my supplier they don't think they can remove egr electronically. I'm not to sure if its cause I asked for just egr off and not egr & dpf..

can someone pls advise me what they think is the best route..

My kess is just a slave but I have a bdm100 clone also..

Thanks in advance

Nik

yas2009
10th April, 2012, 11:46 AM
Disable - to close the EGR card, remove the chip, and fix the errors with wnols disable these errors.

milkatrek
10th April, 2012, 02:00 PM
I have that same problem. Someone know how remove dpf+egr from sprinter 315 ? I have still problem P2011 airflow too much air mass.

autolocksmiths
16th July, 2012, 03:13 PM
______________