MM 6PLB PINOUT FOR XPROG

[jackeldestripador]

Hi folks maybe this can be helpfull for someone. I was looking for connections of XPROG for Magneti Marelli 6LPB ecu but not found. I have some burned ecu and other working well so i remove the st chip and check for some wirings. Work fine in xprog.
Please not forget say Thanks!:ciao:

p.s.: .rar file are the images more bigger.

[grinovsky]

I have open a thread for bdm connection for xprogm
http://www.digital-kaos.co.uk/forums/f175/bdm-connections-xprogm-218551/
and it will be very helpful for all ,to update this thread with your connections
in the end,we will get all XPROGM connections for all ecu
thank you

[jackeldestripador]

Thanks you grinovski!! Thats the idea, together we have more knowledge.
I have some other connections for Delphi ecu but i don't have the xprog permissions to read mc555 processors. Later i will post it.
Thanks!

[jackeldestripador]

Does anybody have some virgin complete file for this type of ecu? (IAW 6LPB HW 16.707.154 SW 16.814.034)
Thanks!:marchmellow:

[jackeldestripador]

For the record, i have found some virgin ecu works fine. Please check if any can write to some 6LPB ecu using xprog. I can't write, only read. I've tryed erasing all and writing but no success, only with st10 flasher or other similar.
Here is the virgin dump. Thanks!

[3abas27]

For the record, i have found some virgin ecu works fine. Please check if any can write to some 6LPB ecu using xprog. I can't write, only read. I've tryed erasing all and writing but no success, only with st10 flasher or other similar.
Here is the virgin dump. Thanks!

how to convert bin file to hex file

[rabie_m]

tested ok thaaaaaaaanks

[rabie_m]

how to convert bin file to hex file
convert of winhex:party:

[3abas27]

convert of winhex:party:

thanks freind rabie

pls winhex or winols for converting?

[mexjack]

Hi:
I'm trying to read an ecu 6LPB with your connection but i have a pin vcc overloaded. Can anyone help me with the correct connections please?
Thank u
BR

[djemai]

Hello
If possible, make me an ecu immo off for an IAW 6LP1.40
I'm in trouble my friends
thank you very much

[pezao]

please I can know what it is ( p0 4 )

[KACZANUK]

For the record, i have found some virgin ecu works fine. Please check if any can write to some 6LPB ecu using xprog. I can't write, only read. I've tryed erasing all and writing but no success, only with st10 flasher or other similar.
Here is the virgin dump. Thanks!

Which interface u used to make this reading?

[romanmartin]

muchas gracias campeon

[romanmartin]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=284799&stc=1espero les sirva de algo compa?eros.

[dadal]

Hi folks maybe this can be helpfull for someone. I was looking for connections of XPROG for Magneti Marelli 6LPB ecu but not found. I have some burned ecu and other working well so i remove the st chip and check for some wirings. Work fine in xprog.
Please not forget say Thanks!:ciao:

p.s.: .rar file are the images more bigger.

Thank you very much mate, Thanks + Rep are added for you,,This info is what I needed

[carlab237]

Hi house, please got this same ecu, need it virgin. But my first problem is reading it. Have tried several time to no avail.
Using the diagram above I have difficulties with
- P04
-using the appropriate xprog adapter to do the wiring before reading
Please help me house.
Thanks

Envoyé de mon HTCD200LVW en utilisant Tapatalk

[Zmann]

If you referred to your another thread of 6LP1, that is completely different to 6LPB

[carlab237]

Here is my ecuhttps://uploads.tapatalk-cdn.com/20180729/6984db0a39ab53e8e346ac1802c7fb92.jpg

Envoyé de mon HTCD200LVW en utilisant Tapatalk

[Zmann]

Yes, I'm aware from your another thread, instead of the label photo posting your clear connection points would be more useful !