PDA

View Full Version : PSA group eeprom counter reset need help



elchip
30th July, 2011, 12:34 AM
Hello to all good peoples here ,
Do someone know how to reset counter of DTC erase in PSA eeprom in ECU ?
I need for EDC15 , EDC16 and at first place SID803.
The counter'go up from 0 to 50 every time when you delete any DTC in ECU as maximum DTC error erase and after that
you cant erase ERROR in ECU any more ...
I need solution.
It is urgent for me now SID803 but I want to know also for other as EDC15 and EDC16 too ..

Zmann
30th July, 2011, 01:32 AM
Never done EDC15,16 only petrol engines but maybe the same. If your cases are similar, the storing addresses accept of only 50 records after that they will be no room to store but still can be erasable. When hitting erase (clear faults) but not done, go back to the particular fault in 'faults reading' then keep hitting each fault until not go further. Now back to erase again, and should be done. This is not the answer to reset the counter but to erase faults, hope this may help.

elchip
30th July, 2011, 08:08 AM
Never done EDC15,16 only petrol engines but maybe the same. If your cases are similar, the storing addresses accept of only 50 records after that they will be no room to store but still can be erasable. When hitting erase (clear faults) but not done, go back to the particular fault in 'faults reading' then keep hitting each fault until not go further. Now back to erase again, and should be done. This is not the answer to reset the counter but to erase faults, hope this may help.

Many thank's anyway for answare.

Maybe we get here someone who answare as ;-)

Regard's

MACKIE
30th July, 2011, 10:50 AM
What eeprom is inside 95320 ?

Regards
Mackie

elchip
30th July, 2011, 08:12 PM
What eeprom is inside 95320 ?

Regards
Mackie
I dont look I was read with BDM100.
Here is DUMP.
I think it have counter from 40 to 50 maybe 45...
At moment on car is 49 but car is not here at moment.
I need reset counter.

73548

Peugeot is 407SW 2.0 HDI DPF.

Any advice ?

damih
30th July, 2011, 09:21 PM
Hello,here a virgin dump

your PIN is LY43

recode with PP2000

and job done

wokounek
31st July, 2011, 06:18 PM
hi friends there is little mistake for Siemens SID ecus is history inside flash = so read flash with BDM hw, post.. and we can help you nice day Wok.:driver:

wokounek
31st July, 2011, 06:30 PM
for info see att.

elchip
31st July, 2011, 10:35 PM
for info see att.

73662

here it is.

wokounek
3rd August, 2011, 10:42 AM
pass PM Wok :driver:

elchip
3rd August, 2011, 12:22 PM
pass PM Wok :driver:
Many thank's m8.
Regard's