View Full Version : BDM 100 DONT WORK
newgeniehex
30th July, 2011, 09:26 AM
hello all
i have a big probleme
my bdm 100 clone dont work
the doft 555 dont work and the new soft too when i start the loader-all4
i have change the 3 transistor bc 547
i have udate the soft but the problem is same
i have put the the licence in window systeme and system 32
many thank in advance
chli1976
30th July, 2011, 09:29 AM
Have you try it on an other ecu
newgeniehex
30th July, 2011, 09:29 AM
hello all
i have a big probleme
my bdm 100 clone dont work
the doft 555 dont work and the new soft too when i start the loader-all4
i have change the 3 transistor bc 547
i have udate the soft but the problem is same
i have put the the licence in window systeme and system 32
many thank in advance
i have put the 12V in the BDM 100 too
djamelEZS
30th July, 2011, 10:25 AM
change dump for 93C46 and HC11
newgeniehex
30th July, 2011, 12:53 PM
Have you try it on an other ecu
hello
i dont have test in the ecu
for read the flash in the cu you must to put the key connect (ON)
chli1976
30th July, 2011, 02:59 PM
You must connect the pin to ecu port and klick ON
newgeniehex
30th July, 2011, 07:49 PM
You must connect the pin to ecu port and klick ON
hello
thank
i find the connection in the notice of BDM100
the connection of the ECU EDC16 C34 it is same for simple edc16
i put the picture
many thank in advance
regard
chli1976
30th July, 2011, 10:46 PM
On your picture is the pinout from anoriginal EVC BDM.
BDM100 clone is not the same
newgeniehex
31st July, 2011, 07:39 AM
On your picture is the pinout from anoriginal EVC BDM.
BDM100 clone is not the same
HELLO
many thank too all
i find the connection
and BDM 100 clone work perfect
newgeniehex
31st July, 2011, 01:55 PM
HELLO
many thank too all
i find the connection
and BDM 100 clone work perfect
HELLO
I have another question
when i read the internal eeprom: it is eeprom internal of the flash or eeprom externe 95160
because i have read the eeprom whit my upa (format BIN)and compare the eeprom 95160 read via BDM 100(format e2p)
i find too the same pin whit the soft immo tool
and the size of the dump is different
the dump is axproximative same
thank in advance
regard
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.