BMW Serie 1 - E87 - 0 281 012 335 - Problem Internal Error

[InfoPerformance]

Hello. I have a problem with this ecu.

The car will not start and has eeprom error.
I tried to make the ecu virgin changing the E2PROM with the help of vicentdali. But still with the same fault.
I attached the reading of the ecu, have someone help me.
Thank you.

BMW Serie 1 - E87

118D

year 2005

[alexs307]

Try realign DDE with CAS via BMW tester.

[mokel andy]

I have a problem with this ecu,too.

[InfoPerformance]

The car is a BMW workshop. And the BMW shop said that we should put the new ECU.

[alexs307]

What is the actual story of this ecu fault? How did it occur?

[InfoPerformance]

The car has stopped more than a year. In several workshops. Apparently it has changed her butt. And I have little data of the problem. I diagnosed the car and I was ECU internal error. The car to confirm my diagnosis sent the car to BMW and BMW has said it has to put the new ECU.
As it is very expensive, have contacted me to have if I can repair.
I have no data to modify the eeprom and solve the problem. Not if it's a physical problem or a software problem. If anyone can help me.
I located another ecu used in a junkyard. But it has the same reference. Clone data, but not if it will work.

[filecloud]

Hello. I have a problem with this ecu.

The car will not start and has eeprom error.
I tried to make the ecu virgin changing the E2PROM with the help of vicentdali. But still with the same fault.
I attached the reading of the ecu, have someone help me.
Thank you.

BMW Serie 1 - E87

118D

year 2005

Hello
At least the flash content is fine and 100% original. That much i can say.
greetings,
filecloud

[dilick]

try to flash the ECu with SSS ...
sometimes it helps try to repgram the ecu or whole car

[InfoPerformance]

The car is in the BMW, have tried all the online forms with access to ICOM. And keep telling the diagnosis of BMW to replace the module with a new one.

Anyone have a virgin file to coding the ecu? and try to solve the problem

[javilette]

this is a original file of this ecu works ok you can try to write this dump whith bdm. this is
0281012335 1037372965 EDC16C35 (http://www.chiptuners.org/forums/viewtopic.php?f=6&t=8966&start=0&hilit=0281012335)

(si no tienes bdm ponte en contacto conmigo y te lo hago yo puedes contar conmigo para lo que te haga falta un saludo)

[InfoPerformance]

Thanks Javi, this file I have it :-)
But the problem I have it in flash I have it in the eeprom, but not if it's a software problem or a hardware problem.

I'm trying to find an ecu for scrapping and cloning have if given the same fault or not.

Thanks, I'll keep working on the problem.

Supports more answers.