PDA

View Full Version : Need help with X5



alexG
31st July, 2011, 07:18 PM
Hi.
i have 58630ml need 21400ml.
Thanks a lot....

remsia
31st July, 2011, 07:34 PM
take it ...........

alexG
31st July, 2011, 07:49 PM
hi i can not write it first 2 line not erayseble or i doo somth wrong/?pleas help

what cheep i can us /?

nomis
31st July, 2011, 08:40 PM
Which prog you are using ?

alexG
31st July, 2011, 08:53 PM
Hi i using Smelecom Datasmart3+ and now i was able to put corect miles usin different adapter but miles go back after 15 seconds on the car
CAS 3 i did yestaday was look good to me

smartymarti
31st July, 2011, 09:07 PM
What year is it ???? Have you done points in back of board , or have you gone direct to chip,

benzstop
31st July, 2011, 09:14 PM
check cas again

alexG
31st July, 2011, 09:27 PM
Hi.
2007 BMW X5 E70
Yestadey i did CAS3 after it, i chnged miles on Dush 35080.
but i did not now cluster was the same no miles was changed i instal it on car, old miles show up ,i was thinking
it will chang after couple miles but not.
If i chasnged CAS3 and put claster back with old mmiles will it chang CAS 3 back to old value ?
Thanks a lotttttt

yes i did remouve chip from bortt

alexG
31st July, 2011, 10:18 PM
Thanks to all .
I did`it.

z786
1st August, 2011, 02:18 AM
you realised you had to change the m35080?
what did you use to do the cas?

alexG
1st August, 2011, 05:20 PM
Datasmart3+

benzstop
2nd August, 2011, 06:10 PM
Cluster and cas will always update to highest value, never to a lower value