Peugeot 307 sid803 dpf off

[bsv2001]

Hi
I read Siemens SID 803 Mpc555 with bdm100
Using Ecusafe 193 I removed fap filter But in dashboard indicator i have following msg: diessel additive level low
I disabled fap ecu in BSI with Peugeot planet also made adaptation level - without result
Now in ECu p000 dtc -ecu can not recognise dtc
may be somebody have solution how to remove msg:diessel additive level low ??
i can put resistance in additive level wires or add fuel in additive tank
But I want to find programs solution
Thanks...

[grinovsky]

use ecusafe2.0

[btr]

Hi
I read Siemens SID 803 Mpc555 with bdm100
Using Ecusafe 193 I removed fap filter But in dashboard indicator i have following msg: diessel additive level low
I disabled fap ecu in BSI with Peugeot planet also made adaptation level - without result
Now in ECu p000 dtc -ecu can not recognise dtc
may be somebody have solution how to remove msg:diessel additive level low ??
i can put resistance in additive level wires or add fuel in additive tank
But I want to find programs solution
Thanks...
In bsi you must choose enginie "petrol or without PEF",and remove from mpc555

[bsv2001]

hi


can somebody remove with Ecusafe 2.0?
Thanks

[grinovsky]

dpf_off by ecusafe 2.0
you need to correct chucksum

[bsv2001]

can I correct with BDM for This ECU

[bsv2001]

Hi
I tried with ecusafe2 and disabled in BSI but have still following msg: diessel additive level low
any solution pls?
Thanks

[grinovsky]

this dtc don't effect any way the engine
so,why you are so werry to get this dtc?

[bsv2001]

I agree and understand This is my client warry when see this msg on screen ::)
Thanks

[alexs307]

how many kilometers has the car run since DPF removal?

[lee_hdi]

Should have told the BSI you had topped the fluid up before you de-activated.

[btr]

how many kilometers has the car run since DPF removal?
Many ...many... km car run's,tested my friend!(My friend have the same engine that I check regularly!)"do not reinvent the wheel"
just need to do to check file ,before write....
:ciao:

[alexs307]

Many ...many... km car run's,tested my friend!(My friend have the same engine that I check regularly!)"do not reinvent the wheel"
just need to do to check file ,before write....
:ciao:

I would be glad if it were that easy! Try to send a PM to user Elchip and he will tell you the rate of success of Ecusafe+Swiftec on a SID803 he is dealing with. I quote him: "Hi, Alex, car again goes puf-puf-puf, it is regenerating!"

So it seems some of the SID will work with these files, some won't. I would be glad if all of them worked!

Anyway, by looking into both Ecusafe and Swiftec files, each of them misses a postcombustion map, so I do not see why regeneration would not occur later even if regeneration matrix is touched as long as there is no DPF OFF switch as far as I've seen after analyzing a Damos for this ecu.

[Takinava]

... I've seen after analyzing a Damos for this ecu.

It will be great to have a look at sid DAMOS. Could you give me such possibility?