View Full Version : CITROEN C3 IAW 48P2.72
avtonega
3rd August, 2011, 08:50 AM
Hi
I Have Citroen C3 in my garage in which it was struck by lightning.
Now only engine ECU is dead, I have replaced it with used one then swap 29f400, but engine still not start.
I have DTC: ECU no response from BSI
I think BSI is also defective?!
I`m not shure, becouse all functions on bsi works fine!
Now I need Immooff, can somebody help?!
Regards
Onwuka williams
4th August, 2011, 02:45 PM
Hi
I Have Citroen C3 in my garage in which it was struck by lightning.
Now only engine ECU is dead, I have replaced it with used one then swap 29f400, but engine still not start.
I have DTC: ECU no response from BSI
I think BSI is also defective?!
I`m not shure, becouse all functions on bsi works fine!
Now I need Immooff, can somebody help?!
Regards
i think this will help
avtonega
5th August, 2011, 10:18 AM
Hi
Engine works :)
But fan is working non-stop...
Zmann
5th August, 2011, 10:26 AM
I tested this dump long ago on PG206. And A/C not working too?, or no A/C?
avtonega
5th August, 2011, 01:31 PM
Hi
AC is also dead...
avtonega
6th August, 2011, 11:50 AM
Solved...
Electric steering had an error, this explain no comunication between ECU and BSI
i_shot_the_sheriff
9th September, 2011, 01:22 PM
Can you clear my file too (C3)?
I've read it with 29F400BB PSOP 44 with WIllem programmer!
I had an error while reading but i got the data! Is the file good? Can you make it immo off?
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.