PASSAT B6 LOST KEY

[lexa-dok]

VW Passat B6 2.0Turbo 2006 USA automat gear

Lost key

Need login and security 7 bytes

add dumps Immo and ECU and Dash



In advance thanks

[haroutioun]

VW Passat B6 2.0Turbo 2006 USA automat gear

Lost key

Need login and security 7 bytes

add dumps Immo and ECU and Dash



In advance thanks
-----------------------------------
Hi,
Dear freind, to adapt new keys you must read dump from comfort module , & you must have speciale tool to program your remote key, after to rewrite the dump to comfort mdule .
YOUR PIN (40652)

[lexa-dok]

Remote it is not necessary only transpoder(MEGAMOS 48)

[haroutioun]

Remote it is not necessary only transpoder(MEGAMOS 48)
Hi,
try dear...

[lexa-dok]

By means of Tango I will write down 7Bytes

[wanderer_sturm]

Tommorow I will help

[H.Wessel]

-----------------------------------
Hi,
Dear freind, to adapt new keys you must read dump from comfort module , & you must have speciale tool to program your remote key, after to rewrite the dump to comfort mdule .
YOUR PIN (40652)

VCDS can not program remote at passat B6??

[mondis]

vag dash can programing remote control in this car.vcds no programing

[lexa-dok]

How to write down a key

[clearly]

VCDS can programme remote

you need working key in ignition first

[lexa-dok]

The key is from the dealer

[lexa-dok]

And still how to register a key

[lexa-dok]

-----------------------------------
Hi,
Dear freind, to adapt new keys you must read dump from comfort module , & you must have speciale tool to program your remote key, after to rewrite the dump to comfort mdule .
YOUR PIN (40652)

Pin 40652 no complete

[richard27]

http://b1108.hizliresim.com/11/8/15/12092.jpg[IMG]
car passat 48can chip use If there is no need to turn on the ignition switch

[IMG]http://b1108.hizliresim.com/11/8/15/12200.jpg
contact to open the short circuit

[umoussa]

The pin code as well as the 7bytes CS mentioned above are not correct.

[richard27]

you passat 48can chip Use the key is already controlled

http://a1108.hizliresim.com/11/8/15/12251.jpg

http://a1108.hizliresim.com/11/8/15/12277.jpg
To turn the ignition to short-circuit

[lexa-dok]

Pin is available

It is necessary for me 7bytes CS

thanks

[lexa-dok]

Pin 52772 is available

[magdyman]

Hello
Zed-Bull ( Turkey ) can do that using vag cable

[Bllinda]

Try this combination: AC A6 F2 03 01 2C 38 and write the reply to PM.

[z786]

sorry to hijack thread, i have same car, iv powered up a fuse to get ignition on, comfort module has no comms and neither does heaters work in car, what circuit could have blow and how can i power up?

[Bllinda]

I do not believe that nobody here knows where is the CS...

[lexa-dok]

Try this combination: AC A6 F2 03 01 2C 38 and write the reply to PM.

thanks

The car doesn't accept yours CS

[lexa-dok]

Can eat what else variants CS

[Bllinda]

Here you can read
Lost VW keys | Replacement VW keys | VW key programming (http://www.theautolocksmith.co.uk/Volkswagen-car-keys.html)

[haroutioun]

Pin 40652 no complete
-----------------------------------------------
Dear friend,
i try to work on your dumps but in the end come out with me >>
The dump of the comfort module cannot be decoded, because the CS entered from the Engine Control Unit is wrong.
The EEPROM dump from the MED9x is encrypted, so the CS you get from the EEPROM is not correct.
You need to read the engine control unit by OBDII, then you will have the real CS, and the comfort module will be decoded.
ok dear, this is my idea about your....
Good Luck...

[Bllinda]

How do you think, what is a 4 digit security code (SC) and the Secret Key Code (SKC). Helping or is manually entered in the comfort of module SC and SKC?
Thanks

[haroutioun]

How do you think, what is a 4 digit security code (SC) and the Secret Key Code (SKC). Helping or is manually entered in the comfort of module SC and SKC?
Thanks
-----------------------------
by OBDII get pin code from engine ecu + 7bytes, after manually entering by programer.

[Bllinda]

What is the OBDII device that can be done? I can PM.

[haroutioun]

What is the OBDII device that can be done? I can PM.
-------------------------------------
Hi,
in DK every one have it self device to do this work,
so i use avdi to this operation.

[lexa-dok]

AVDI isn't present available

[haroutioun]

AVDI isn't present available
-------------------------------------------
friend,
what are you mean about avdi isn't present available?
plz can you give me more detail what are you mean?
thank you...

[lexa-dok]

not use AVDI

Other mode is necessary

[haroutioun]

not use AVDI

Other mode is necessary
------------------------------------
this is your idea about.....
but anyway thank you.

[kavan]

all this headache!!
try
TMPro - Modules (http://www.tmpro.co.uk/modules177.html)

[exe123]

all this headache!!
try
TMPro - Modules (http://www.tmpro.co.uk/modules177.html)

same story here.


Software module 149 - VW Passat 3C comfort and ECU with ID48
Module needs 2 files - from engine ECU and from comfort module.For engine ECU supported are EDC16 with eeprom 95c320,MED9 with 95c080 and Siemens SIMOS PPD with 95c320.For comfort module eeprom is 95c320.

So you will need ecu dump. If MED9x is crypted it will NOT work! Only way on MED9 is read via OBD!

[haroutioun]

same story here.



So you will need ecu dump. If MED9x is crypted it will NOT work! Only way on MED9 is read via OBD!
-----------------------------------------------
Hello Dear exe123,
1) thank you for your explain about this story. you are the best,in my past email i write only by OBDII can done & i try to explain about this, but no answer...
so i wish to you Good Luck.:flowers:

[Bllinda]

VW Passat B6 2.0Turbo 2006 USA automat gear

Lost key

Need login and security 7 bytes

add dumps Immo and ECU and Dash



In advance thanks

Apparently for that reason_VAS-PC_and connects to the Internet.

Click here.
(http://www.ross-tech.com/vag-com/faq_4.html#skc)


We do not know of any way to retrieve an SKC for VW/Audi/SEAT/Skoda vehicles.
Prior to 2002, some vehicles were delivered with a scratch-off panel on a plastic tag that contained the 4 digit PIN code.
Starting in 2002, dealerships implemented the WIN2 system to provide SKC's to their technicians and customers.
Starting April 1, 2005, VW/Audi dealerships switched to the new GEKO system, whereby their factory scan tools dial up the factory while connected to a car.
Under this system, the technician no longer sees the SKC at all and you will need to bring your vehicle into the dealer to have Immobilizer work performed.
VCDS does not interact with the GEKO system.
Check out our Immobilizer Page for more information and procedures.

[lexa-dok]

Where to take VAS-PC_and connects to the Internet

[lexa-dok]

And still who knows as to write down a key on PASSAT B6

[lexa-dok]

But there should be still a mode to write down a key