Peugeot 307, year 2004, BSI VALEO ST95160, virgin dump

[Alex_G]

Hello,

I need virgin dump for Peugeot 307, year 2004, 1.4 HDI

inside is VALEO BSI K02-00

ST95160

I attache picture of BSI, please is possible that someone send me good virgin BIN, so we can reprogram BSI.


Thank you,
Alex_G

[honingkoning]

Hello,

I need virgin dump for Peugeot 307, year 2004, 1.4 HDI

inside is VALEO BSI K02-00

ST95160

I attache picture of BSI, please is possible that someone send me good virgin BIN, so we can reprogram BSI.


Thank you,
Alex_G

This one worked for me

[Alex_G]

Thank you, will test it tomorrow morning,... and let you know.

After you write this VIRGIN bin, you had just to connect BSI in car and that's all ,... all data was automaticaly transfered to BSI and car start normaly, or you had to connect car to service tester?

Thank you,
ALEX_g

[tachonow]

Are you joking ?
You need to recode all functions on bsi or make telecoding online at the dealer.

[Alex_G]

No,...

So if i understand this DUMP should work,... i just write this into BSI, mount it back to car and take it to dealer so he ca reprogram it(code, car ID, and some other info about car equipement,...).

If i dont bring him VIRGIN BSI, he cant reprogram unit?

Correct?

Thank you,
Alex_G

[Apolo29]

When you put a virgin dump in a Bsi you have to telecode it again.

You need Pin, Vin for the car an pps o take it to dealer to telecode.

What was the thing with the original?

If original doesn`t work you have to put a virgin dump.

[honingkoning]

No,...

So if i understand this DUMP should work,... i just write this into BSI, mount it back to car and take it to dealer so he ca reprogram it(code, car ID, and some other info about car equipement,...).

If i dont bring him VIRGIN BSI, he cant reprogram unit?

Correct?

Thank you,
Alex_G

Mate where are u located maybe some member can help you if you are in holland i can help you.
You need pincode you can also get this from DK and then you have to program car with pp2000.

Regards Honingkoning

[Alex_G]

Thank you Apolo29 & honingkoning!

Original was corrupted while reading, thats why i asking how to make and use virgin file.

No, i m not from holland, but thanks for offer.

Actualy i can say that if virgin dump that you attached will work, i think i dont need to worry any more, as i will just program this to car and take it to dealer, they can finish programming.


Regards,
Alex_G

[n599fbm]

Try this,

gds,

C.

[macrae]

Try this,

gds,

C.
Is the file can be used for valeo J03?

How to write the dump to the existing BSI? what software do I need to write the dump?

After successfully writing the dump, what do I need to do to refit virginized BSI into the car?

Sorry, need advise here. I am a newbie to this kind of things.

[Zmann]

Yes, if it was working but preferable choose the more clean file on top

You will need an eeprom programmer and looking for the BSI pinout image for the eeprom connection

You will need Peugeot tool, PP2000 or DiagBox