Nissan Murano -mileage calculation

[ledojo]

This is from an 08 Nissan Murano. Shows 95335 miles, but I need to change to 35742 miles--or as close as possible.

Tried to use some sw to verify cluster mileage but it doesnt match up--maybe someone can verify what the cluster has, also?

[vuno01]

bro maybe this will help you
Car type: Nissan Murano (miles) Type 2 - 93c66
The mileage is stored in the next lines:
0060: xx xx xx xx xx xx xx xx 89 AB 13 57 26 AE 4D 5C
0070: xx xx 11 57 22 AE xx xx xx xx xx xx xx xx xx xx
where the next bytes:
String #1 = 89 AB 13 57 26 AE 4D 5C
String #2 = 11 57 22 AE
FOR 35742 miles use
35742ml =
String #1 = 0EB31D663ACC7598
String #2 = 1B6636CC
OR

Car type: Nissan Murano (miles) Type 1 - 93c66
The mileage is stored in the next lines:
0060: xx xx xx xx xx xx xx xx 34 7F 68 FE D1 FC A4 F9
0070: 3F FE 66 FE CD FC xx xx xx xx xx xx xx xx xx xx
where the next bytes:
34 7F 68 FE D1 FC A4 F9 3F FE 66 FE CD FC - is a mileage
FOR 35742 miles use
35742ml = B986730DE61ACD353FFE710DE21A

[digimile]

hi
ur dump is incorrect or corrupted so please read as 93c66X16 with upa usb programmer and u got good data according to tachosoft and u able to do it.only 5 min. job of programming
Thankx

[ledojo]

bro maybe this will help you
Car type: Nissan Murano (miles) Type 2 - 93c66
The mileage is stored in the next lines:
0060: xx xx xx xx xx xx xx xx 89 AB 13 57 26 AE 4D 5C
0070: xx xx 11 57 22 AE xx xx xx xx xx xx xx xx xx xx
where the next bytes:
String #1 = 89 AB 13 57 26 AE 4D 5C
String #2 = 11 57 22 AE
FOR 35742 miles use
35742ml =
String #1 = 0EB31D663ACC7598
String #2 = 1B6636CC
OR

Car type: Nissan Murano (miles) Type 1 - 93c66
The mileage is stored in the next lines:
0060: xx xx xx xx xx xx xx xx 34 7F 68 FE D1 FC A4 F9
0070: 3F FE 66 FE CD FC xx xx xx xx xx xx xx xx xx xx
where the next bytes:
34 7F 68 FE D1 FC A4 F9 3F FE 66 FE CD FC - is a mileage
FOR 35742 miles use
35742ml = B986730DE61ACD353FFE710DE21A

Yeah, I tried that and nothing matches up correctly for what the mileage readout shows. I tried DMII also--just in case and it cant read the ic, either.... I compared and it does appear to be the type 1.... but possible digimile is correct about the corruption of dump.... or, possible this one's just different?


hi
ur dump is incorrect or corrupted so please read as 93c66X16 with upa usb programmer and u got good data according to tachosoft and u able to do it.only 5 min. job of programming
Thankx

I checked and double-checked the pinouts and connections. I did read as 16bit and even checked the 8bit. Parts of the dump look 8bit but then so does tacho's when trying to correct. I also compared to other dumps of muranos i found in other threads... doesnt look similar.

I gave up for the day and will try fresh tomorrow...
Will post update if I have one.

[cfst_arica]

The board has two 93c66.
You are reading the wrong one.

[ledojo]

The board has two 93c66.
You are reading the wrong one.

A bit late... seriously too late for the help.

I didn't update thread, but somehow it was solved--look at the initial post date.... wish you were around to offer advice at that time.

:top: