Honda CR-V 2004 lost all keys

[SaieedEissa]

I have Honda CR-V 2004 Lost all keys , i tried to register key using HDS but always goes to FAIL , I'm Using T5/M13 transponder . I scanned the Engine ECU but there are no faultes , so I read the data of the eeprom inside the Immo box , which is 93C46 , and attaached , I want to know if the data is damaged , or the type of the transponder i used is not the required . Can anyone determine the type of transponder needed to register new key

[shitad]

I have Honda CR-V 2004 Lost all keys , i tried to register key using HDS but always goes to FAIL , I'm Using T5/M13 transponder . I scanned the Engine ECU but there are no faultes , so I read the data of the eeprom inside the Immo box , which is 93C46 , and attaached , I want to know if the data is damaged , or the type of the transponder i used is not the required . Can anyone determine the type of transponder needed to register new key


Most T5 chip comes without data so you must first write good data to the T5 chip.

[bram380]

Transponder type:
Megamos 13 (ID13)
T5
TK5551

Key2 data:
20 28 E9 33 B2

[ivanrpm]

I have Honda CR-V 2004 Lost all keys , i tried to register key using HDS but always goes to FAIL , I'm Using T5/M13 transponder . I scanned the Engine ECU but there are no faultes , so I read the data of the eeprom inside the Immo box , which is 93C46 , and attaached , I want to know if the data is damaged , or the type of the transponder i used is not the required . Can anyone determine the type of transponder needed to register new key

2004 uses id46!

[cjawahir]

2004 uses id46!


2004 model dont use id46 , this year uses id 13 or 48 .

cj

[SaieedEissa]

year 2005 uses 46 but this , i cann't decide if T5 or M48

[sogaro]

Honda CR-V USA model form 2002-2006 uses ID13 while the Europe version same period uses ID48, 2007 Europe model uses ID46

[keygargoil]

its crypto 48 if your key is hon66 id13 is 1997 to 1999 then 1999 to 2001 id48 with hon58rt5 then 2002 to 2007 hon 66 with t6 id48 chip thats why its failing to programme the key iv had it on a jazz i was trying a t6 when i needed a 8e as soon as i put an 8e chip in the key it programmed 2007 onwards is id46

[dam495]

id 13 , until 2004

[dam495]

20 28 E9 33 B2 he's right, your key date, try write this numer with zed bull or ad90, ad900 whatnever ,

[keygargoil]

here it shows you all ids for honda cars

[cjawahir]

year 2005 uses 46 but this , i can't decide if T5 or M48


hello friend , its id 13 , just write data on a t5 chip , as the Bram 380 said here ,

also you can get a type 13 chip and program with ad 100 , HIM , FLY 100 , ETC

PS a t5 chip comes blank , as Shitad said before
cj

[dilick]

It's Megamos Cryto id48 find a transponder and post data i will write it into you immo dump.

[ssemmedo]

Hi. My honda cr-v 2006 has new key, new ignition with immo and new ecu. i try to program the key with SBB original at the end it fails. I try with mvp and at the end it fails too. now i have dump from ecu and from immo. i want o have e help in immo off or write the transponder with zedbull or sincronyse the data from eci to immo. the files are attached. I can pay if the car start by paypal.
Thabks in advance.

[PeanutBrittle]

Sorry for the thread resurrection!
I need to make a key for a 1999 CRV, RHD Uk spec I think it is, they changed the immo spec in 99 , early 99 uses Megamos ID13 late 99 uses ID48
How do you tell if the vehicle needs ID13 or ID48 transponder chip?

[ssemmedo]

i did immo off in my case. but u can see in immo refence than see with transponder to use. Also u may know if this immo can fit the original ecu. witch tool do u have to program the key?? To make immo off just unsolder the vertical board inside the ecu.

[PeanutBrittle]

i did immo off in my case. but u can see in immo refence than see with transponder to use. Also u may know if this immo can fit the original ecu. witch tool do u have to program the key?? To make immo off just unsolder the vertical board inside the ecu.
The problem is they changed the immo type mid year on the 1999 CRV - the reference shows 1999 CRV use ID13 or ID48.
I need to work out which transponder chip the 1999 CRV I have is using, how do you identify which it will use?

[janake]

Try xtool x100 pro from xtool.uk
TOOL X100 Pro2 can program Honda key below:


Immobilizer
Auto


3PIN


16PIN


Manual


Type 1 (3G)


Type 2 (4G)


Smart key system
Type 1 (knob)


Type 2 (button)


Type 3 (button)


Remote


Program remote (9G)


RN6 07-

here the article of How to use XTOOL X100 Pro2 Program Honda CRV 2004 Chip ID 13 All Keys Lost
http://xtoolsupport.com/xtool-x100-pro2-program-honda-crv-2004-chip-id-13-all-keys-lost/