Peugeot 306 Access Code

[Rob Turbo]

I need to program new keys on a 2001 306 2.0 HDI, I have the transponder pin code but it wants a different code, pp2000 is asking for an access code, 4 digits, only numbers

The VIN is: VF37ARHYF3322155
The Pin is: XX1A

Can anyone help with this access code?

Thanks in advance.

[Rob Turbo]

Can nobody help with this?

Apparently this system was only fitted to the 306 for a year or two, after Peugeot Transponder, but before BSI's were fitted (BSI's were never fitted to the 306), it's a CPS or something, pp2000 sees it as a BSI but it only has alarm/immo/central locking data.

Need to get this sorted ASAP.

Thanks,
Rob

[racin-snake]

what type ecu ?
if you could give the type ect we can maybe tell you what chip to read

[Rob Turbo]

The ecu is an EDC15C2, 3 plug version, but I believe the code is part of the "BSI" (not really a BSI, as I said above), I think it's under the drivers seat, I'll have a look and see if I can find any more info.

[racin-snake]

read chip 95040 in this box and post the dump

ime sure this is the immo box you are thinking off

[Rob Turbo]

Is that the one from under the drivers seat?

I'll find it tomorrow and post the dump.

Thanks,
Rob

[racin-snake]

think so mate but not 100% with just the info you have given here

[Rob Turbo]

Here is the dump from the 95040, the box was under the centre of the dash, above the ash tray!

[racin-snake]

try 40A5 mate its what i get but again not 100%

[topclef]

Here is the dump from the 95040, the box was under the centre of the dash, above the ash tray!

PIN is = XX1A

try it and let me know the result , Good luck :celticscarf:

[racin-snake]

how did you calculate that pin Topclef ?

i tried the peu/cit incode tool its just shit never hit the right pin yet lol

any info appreciated:wink:

[Rob Turbo]

Turns out I had the right pin all along! (the one that topclef posted is the one I already had from the vin to pin thread, see OP)

The reason I couldn't enter it was it only accepts capitals, every other car I've done with pp2000 didn't need me to hold shift, it would automatically change the letters to capitals, but on this one if I didn't hold shift it wouldn't accept the letter.

Thanks for your help.

[motor6605]

how did you calculate that pin Topclef ?

i tried the peu/cit incode tool its just shit never hit the right pin yet lol

any info appreciated:wink:

Icc calculate pin code for this dump.