TOYOTA VERSO 2003 IMMOBOX

[dashtec]

IMMOBOX 89780 44030
93CLC66

CAN ANY1 TELL ME WHAT TYPE OF TRANSPONDER I NEED, ALL KEYS LOST.

I HAVE 4C WITH READING 6B 06 EB 01 00 00 00 00

IF 4C CAN YOU ADAPT KEY DATA INTO FILE

[bram380]

Hi,
Try this dump & report.

[dashtec]

still wont start, original transponder required a battery 3v see pic

[keygargoil]

so have you sorted it did you read the key in tiris

[bram380]

Hi,
Try this dump & report.

note:
-write this dump with x8 & use key_6B E6 EB 01
-maybe your key_data worng tiris format.

[dashtec]

got orignal transponder to work, file is x8 format, will try method stated, let you all knw of the outcome, many thx to all ov you

[marassa]

hey frend i have the sim prob with toyota camry 1998 i need to programme a new key haw i can read code for 4C to adabet with immo box

[dashtec]

i used carprog to obtain key data

[dashtec]

got another problem, when i put key and switch ignition on, immo light goes off, scanner pick no code.

when i try to start , engine turn but car wont start, scanner report engine immobaliser fault

has any1 any ideas

this car is ~~~~ing my head

[sogaro]

Jump T1 and E1, pin 4 and 13 for 30minutes after putting ignition to ON, after the 30minutes switch and remove jumper and start car

[dashtec]

tried jumper method twice no joy, reset codes tried to start and it worked, starts and drive many thank to all.

[keygargoil]

i have a carolla brought in last week with the same problem security light goes out but car wont start does anyone have any info on ecu faults for toyota d4d

[dashtec]

have you checked for any dtc codes, mine was showing engine immo fault, tried sync method bridge pin 4 and 13

i tried mine twice, after sync disconnect battery leads join together and reconnect try to start.