Log in

View Full Version : Hyundai Santa Fe 2.2crdi FAP


eugen8
11th August, 2011, 03:23 PM
Hi,I used Ecusafe2.0 to remove fap from this car(edc16c39,0281013584)but without succes because after about 20 miles Mil light begin to flash and engine starts to regenerate...if I disconect differential pressure sensor I have insuficient flow on EGR and MIL...maybe somebody can help me and eliminate FAP
macxlulu
11th August, 2011, 04:42 PM
test file

pass to pw
eugen8
11th August, 2011, 04:50 PM
test file

pass to pw
Thanks a lot,mate...I'll try it tomorow and I let you know
eugen8
13th August, 2011, 04:47 AM
first of all must say that your file much better then ecusafe file...no more fault codes related to EGR and car doesent regenerate anymore...but MIL light still blinking because of differential pressure sensor...THANKS!!!
macxlulu
13th August, 2011, 08:42 AM
disable regeneration is not a problem , but unfortunately nothing of the sensor not help
BR
G2T
1st October, 2011, 09:45 PM
Hi macxlulu.

please pass
bts
4th October, 2011, 11:51 PM
hyunday bdm flash dpf off speed280km

no pass.
peregrine
20th July, 2012, 04:25 PM
disable regeneration is not a problem , but unfortunately nothing of the sensor not help
BR


Hi,

How can this be done as I am having a real big problem with one. EGR and DPF of but the car still regenrate making a massive amount of smoke.
Poptest
24th July, 2012, 04:46 AM
Why do you want to change it? Smoke is normal during regeneration.