Passat CC 2010

[fateh1250]

Hello


I need help to program additionl key for Passat 2010 CC .

In fact i did many Passat ID 48 transponder Using Commander and Tango .

But this car with keylessgo and Transponder ID 46 .

I have read pincode and CS component security via commander .

My qustion is :How to program CS into Transponder ID 46 :

CS :1B 8E 27 62 37 1C
Pincode :38018

Thanks .

[Bllinda]

Can I see the ECU damp?

[fateh1250]

I did not remove ECU ..

I have just read CS and Pin via OBD .

[fateh1250]

Hello

Any additional help ?

Thanks .

[clearly]

what ecu in the car


with you having 6bytes you can get 7th from keys if its spare key

or if lost key key in key out till you find 7th byte

[haroutioun]

Hello


I need help to program additionl key for Passat 2010 CC .

In fact i did many Passat ID 48 transponder Using Commander and Tango .

But this car with keylessgo and Transponder ID 46 .

I have read pincode and CS component security via commander .

My qustion is :How to program CS into Transponder ID 46 :

CS :1B 8E 27 62 37 1C
Pincode :38018

Thanks .
---------------------------------------------------
Hello,
1) you must have Key programmer if you have available the 7 bytes of the component protection data and you need to use an Megamos 48 transponder as base for this operation.you must put the remote key in the programmer & write in the menu of programmer the 7 bytes. after he write the 7 bytes in your key transponder.
Good Luck.....

[haroutioun]

Hi,
i give you example about Megamos 48 transponder, i know you are using ID 46, if you have key programmer you can get the 7 bytes c/s by your dealer key.after you can write manual the 7bytes in the programmer ,after key learning ...
Good Luck....