TOYOTA RAV 4 2007 MODEL ECU

[medsa]

HOW TO RECODE ENGINE CONTROL UNIT WITH IMMO BOX IF OLD ENGINE UNIT IS MISSING
I HAVE A USED CONTROL UNIT CAN I USE IT FOR THE CAR AND HOW TO DO IT
THANKS

[keygargoil]

if its the right ecu does it have a seperate 4d immo box, with keys because it makes all the difference, if you have the keys bridge 4 and 13 for 35 mins or read immo box post dump and il add a key in for you to learn the immo

[medsa]

OK THANKS YEP I HAVE THE KEY IF ANYTHING I LL SEND THE IMMO DUMP

[medsa]

hi
i have bridge the pin 4 and 13 for 35 min but the car star and goes off . what could be the problem maybe the used ecu is not compatible with the car
any way this the immo dump
the sec goes off when the key is inserted into the key cilynder

[autofan1965]

Have You make first ignition on then this bridge? When You make bridge lights on dashboard should blink.

[medsa]

YES THE LIGHT ON THE DASHBORD WERE BLINKING

[keygargoil]

read the eeprom from the ecu and send it me so i can look at the sync bytes then try this file you will need to bridge the pins 4 and 13 before trying it