Peugeot 206 New BSI

[EwellG]

2005 Peugeot 206 with new BSI installed. I do not have Lexia to configure it but have EEPROM programmers.

My ECM locked since the BSI and PCM are not matched.

I cannot program new keys since the PIN in the BSI is not the same as the PCM.

Is there anyway I can work around this to get this car to start?

Car has KFW SAGEM 2000 ECU

BSI is SIEMENS with PSA 9652474380

I have attached the dumps of the 95160 from the BSI and and the 95080 from the ECU.

VIN is VF32AKFWR3W061889
Calculated VIN to PIN is 7U51

[EwellG]

i have tried immo off on the ECU using immokiller. ECM still locked and no start. Removed the 95080 from ECU and attempted a start. Nothing.

Tried immo off using OTOCHECK on the 95160 chip of the BSI. ECM still locked and no start.

Some data I got shows no keys programmed. Since the BSI is new, am unable to program the keys using the pin - 7U51 which is derived from the VIN.

Any ideas on what I should try next?

[racin-snake]

there are a few s2000 off dumps on the forum if you use the search facility mate

[driss dig]

hello as the dump bsi you have posted the VIN is VF32MHFXA9Y030537 and the PIN is JZCE

[driss dig]

Here is a dump in immo off tested.for ecu sagem S2000.GOOD LUCK

[flyins]

Here is a dump in immo off tested.for ecu sagem S2000.GOOD LUCK

tried immokill last week on 307 d, didnt work, has anyone else had problems with it?

[chacarita]

Did you try copy old memory in new BSI memory? if the car was runing before bsi was broken then you can copy old memori y new bsi and willbe ok

[flyins]

which chip from bsi memory do i copy from in old bsi? I can copy this into good second hand one cant i???

[teuton]

which chip from bsi memory do i copy from in old bsi? I can copy this into good second hand one cant i???


eeprom 95160

[gtmech]

you really need lexia mate, you cant work on those peugeots without it. If the eeprom is ok you can copy it as said above but its not always that simple and when its not you will need lexia to fix it, make the investment and then no peugeot will be a problem for you

[flyins]

Yea ive got lexia and pp, just trying to confirm what ive heard regarding using the memory from old bsi. The 95160 i get the pin from that when run it through immo software, just wanted to make sure thats the only data i required to use for another bsi, thanks to all

[teuton]

Flyins,

it wii be nice to say thank you to the people who dedicate their time to help you !!

[flyins]

Thank you to you all, i put on my post, thank you

[flyins]

Thank you for dedicating your time

[flyins]

eeprom 95160
thanks, just getting used to using site

[teuton]

O.K. mate, take it easy. I did'nt want to flame or offend you. I just wanted to say that you push http://www.digital-kaos.co.uk/forums/images/styles/digital/buttons/post_thanks.gif (http://www.digital-kaos.co.uk/forums/post_thanks.php?do=post_thanks_add&p=1263794) buttons to show that you appreciate the help offetred., that's all. It's not necessary to write thank you, thank you, thank you all over the place.

greetings

[gtmech]

Yea ive got lexia and pp, just trying to confirm what ive heard regarding using the memory from old bsi. The 95160 i get the pin from that when run it through immo software, just wanted to make sure thats the only data i required to use for another bsi, thanks to all

yes its all you need to copy to new bsi